Thread: New Project

Tweet

Originally Posted by v8nutz

Looking good so far. Is that stainless? I kind of enjoy building exhaust with a bare frame, crawling underneath not so much.

No not stainless, I wish it was but just can't pay the bill. Yes its nice with bare frame !

Ended up doing an H-Pipe in the exhaust

Just trying video post didn't work

few pics for update.
Got the body back on the chassis today.

one thing for sure is I have plenty of room for the engine

Had to do some trimming to get it back down on the frame. This I did not see coming when I put the suspension parts in place, its no big deal though just a bit of sheet metal work.


Trans tunnel needed to be cut out just a little bit.

I picked up 4 donut wheels at the junk yard for $70. Cut the flat tires off and now I have shop wheels for this project.

Progress!! Thanks for the update pics!

It's going to be a very cool car.

More sheet metal work. driveshaft tunnel and floor bracing. also the tubes will be the base for seats.

That looks good, should stiffen it up too.

I agree that is coming along nicely.

More progress today , brakes were todays project
Got some holes drilled and mocked things up. Next will be proper bracing of firewall to support the MC/Booster set up.

Found some seat on Face Book Market Place $25 each. started install today.

ok here's the latest thing I've been working on or thinking about. Center consol with cup holders GPS etc. Made a cardboard mockup to get an idea of what might work and how it would look.