37 Ford build--IE: old Header issues thread /37 Ford/5.0/GT40P heads

[bluestang67]

Also the do have the Chrysler logo stamped on the inside , they are older mopar wheels for sure .

[randyr]

Also the do have the Chrysler logo stamped on the inside , they are older mopar wheels for sure .

I thought they looked like Mopar wheels....

[bluestang67]

Yep good thing Mopar has the 4 1/2 bolt pattern

[IC2]

Bobby - I going to splash a drop or two of water on those MoPar wheels. Don't forget that they wont fit without possible wobble unless you use some rings to make them again "Hub Centric" on your Ford hubs. Here's what I mean -

http://www.prestigewheel.com/Catalog/HubRings66_67.pdf

There are several manufacturers but the above is a write up mostly of what the rings will do.

And much of that CA NA DA steel, which is much of what I get too, comes from Korea (Posco Steel) into Canada as raw stock to be processed into bars and plate (GE put a couple gas turbines in that plant in Korea )

[bluestang67]

"Interesting" wheels Bobby... I am unsure of "the look" but it will be different and depending on the tires.. could be appealing. When you're ready, I'll take a couple Oxycodone with a couple Valium and we'll float down the street together!

I am ready knee is hurting i will do 2 Vicodin and a clanopam to yours .
s

[34_40]

I am ready knee is hurting i will do 2 Vicodin and a clanopam to yours .

OKAY Bobby, I guess we'll file this under "you know your old when"! Or how about, I'll trade you 2 blue ones for 3 of those yellow ones there?

Sometimes I think John Lennon said it best , "Whatever gets you through the night"!

I'm actually feeling pretty good! Compared to last week or the week before!! With the relatively warm weather today (50's) I'm gonna take the car out for a ride and finally try out the new shocks!

[bluestang67]

Mike Glad to here the mobility is coming back with less pain .

[bluestang67]

I understand totally and glad some one else picked up on it . I was thinking till you posted this that if they are to large I could just have a space made up at work .

Same thing we use on the Chevy crank when it is grooved .

Bobby - I going to splash a drop or two of water on those MoPar wheels. Don't forget that they wont fit without possible wobble unless you use some rings to make them again "Hub Centric" on your Ford hubs. Here's what I mean -

http://www.prestigewheel.com/Catalog/HubRings66_67.pdf

There are several manufacturers but the above is a write up mostly of what the rings will do.

And much of that CA NA DA steel, which is much of what I get too, comes from Korea (Posco Steel) into Canada as raw stock to be processed into bars and plate (GE put a couple gas turbines in that plant in Korea )

[34_40]

Mike Glad to here the mobility is coming back with less pain .

Bobby, and all the regulars here, just wanted to share with you that I was given clearance to return to work after the 18th! While I am still just a touch sore I am so much better than back in december! Now I can get back to the details that I wanted to do over the winter!

[Bob Parmenter]

Good on you Mike....

[Dave Severson]

Sounds great Mike, that healing up takes a bit more time then it used to, huh???

[randyr]

Bobby, and all the regulars here, just wanted to share with you that I was given clearance to return to work after the 18th! While I am still just a touch sore I am so much better than back in december! Now I can get back to the details that I wanted to do over the winter!

Clearance to work is great!! Clearance to play is even BETTER!!!

Happy for you, Mike!!!!

[34_40]

Clearance to work is great!! Clearance to play is even BETTER!!!

Happy for you, Mike!!!!

Thanks Guys! It's amazing what they can do with 2, 3/4" slits in your back!

And yes Dave, I do seem to heal a bit slower than 20 years ago!

[bluestang67]

Mike yep glad to hear that the ok is given to resume some fun things .

[34_40]

Mike yep glad to hear that the ok is given to resume some fun things .

And the thing called work too Bobby! I'm actually looking forward to getting back to it! It's been a couple boring months!