37 Ford build--IE: old Header issues thread /37 Ford/5.0/GT40P heads

[406Rich]

235 /75r 15

[bluestang67]

235 /75r 15

I am sure I have to much tire Rich , have you got lowering blocks installed .

[bluestang67]

This is the 235 and the 255 on the 31 255 fills it nice .

[randyr]

This is the 235 and the 255 on the 31 255 fills it nice .

Yeah, the 255 on the 31 is much better!

[406Rich]

No lowering blocks, but if I drop tire size i will have too. Thanks for the compliment Randy, I still have some redo work ahead of me, but in seven months I `ll retire and have the time. ( rear valance at the trunk corners and upper corners of the trunk stress cracks from the old transverse spring).

[bluestang67]

No lowering blocks, but if I drop tire size i will have too. Thanks for the compliment Randy, I still have some redo work ahead of me, but in seven months I `ll retire and have the time. ( rear valance at the trunk corners and upper corners of the trunk stress cracks from the old transverse spring).

235's and up are a good fit for this size car I think ???

[randyr]

235 /75r 15

I used to have 235/70/15's on the back of mine. This was with a 1" lowering block with the previous crappy parallel spring setup I had....

[bluestang67]

I used to have 235/70/15's on the back of mine. This was with a 1" lowering block with the previous crappy parallel spring setup I had....

Looks good here like to see a complete side shot .

[randyr]

Looks good here like to see a complete side shot .

I don't think I have a complete side shot anymore. I lost a bunch of pics when my hard drive crashed 2 years ago. I took this pics for CL cause I sold these wheels. Here's a pic of the left front. You can see where the paint was getting funky...

[406Rich]

I don't think I have a complete side shot anymore. I lost a bunch of pics when my hard drive crashed 2 years ago.

I had the same thing happen

[bluestang67]

Yeah we never back up the pics soon enough do we . Looks like you have a rake I like Rich's look but may be a touch higher in the front.

[randyr]

Yeah we never back up the pics soon enough do we . Looks like you have a rake I like Rich's look but may be a touch higher in the front.

Yeah, I didn't have the dropped spindles at that time.

[bluestang67]

So you going to drop it lower in the front ???

[406Rich]

I`m running a weedeater axle from magnum axle 5.5 drop, with reversed sping eyes, I may add one more leaf tho, but haven`t committed to it yet, I `ve been noting all your improvements on the 9`inch, i have a`69 bronco housing at 58 inches, I located one `69 lincoln 31 spline right side axle for it, length is right for the left side bronco, now I just have to buy one axle for the right side, and looking for 300 or 310 posi third member and discs for it, its just fun doing the cheap.... But I do like your cobra setup....