Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Track T Info Needed
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    Rich King is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Boonton
    Car Year, Make, Model: 1940 Mercury Convertible
    Posts
    13

    Track T Info Needed

     



    Looking for some help.....

    Im currently considering building a Track T..... Yup I have been all over the internet looking and it seems that Speedway Motors has the most complete car on the market but I do have the ability to fabricate many of the parts that I will need so Im not limited to the purchase of a complete kit....

    A few years back there was a company that I believe was located in the northeast and then relocated to Fla... but as much as I have searched they seem to have disappeared... The company went by the name of E Coast Cool Cars and had a web address www.ecoastcoolcars.com.... Their car (modeled after a 27 Ford style) as I remember had a long extended door that almost consumed the entire side of the body they also used an independent suspension system on the front end.... The car was impressive although as I remember was quite expensive. I would like to know if anybody has any information on this company and if they are still in business. I would really like to hear from anybody that may have purchased one of their cars and how the assembly quality was.... I would also consider the purchase of one that is still in project state or complete....

    I did also find another car that is very similar but utilizes the traditional suspension and I would consider it more of a street rod style than Track style... This company is Precision Fiberglass in Kansas... I have written numberous letter to the company regarding their kit and only get small bits of information back on 1 email... I cant seem to understand why these companies spend the time with a website and dont reply to correspondance.... Do they really think that anybody is just going to send $5000.00 plus on a sight unseen product.... Damn they dont have good photos on the site and cant seem to get their act together providing the consumer with details of what you get for your mone........

    Any help will be greatly appreciated....

    Thanks
    Rich King

  2. #2
    Hotrod46's Avatar
    Hotrod46 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Vidalia
    Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
    Posts
    1,500

    You might want to look at Zipper Motors. I notice their old website is down and is under construction. They do have contact info on their temporary page.

    mailto:sales@zippermotors.com

    They have some nice looking '27 based stuff.

    Mike

    BTW Welcome to CHR!

  3. #3
    Bob Parmenter's Avatar
    Bob Parmenter is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,876

    46 is being modest, he has a thread going that might be of help; http://www.clubhotrod.com/forums/sho...998#post288998

    Likewise Jim has a thread chock full of inspiration; http://www.clubhotrod.com/forums/sho...002#post289002
    He's using a stretch body from Koory.

    Other suppliers of "oversize" bodies are;
    www.olddogstreetrods.com
    www.poli-form.com
    www.shadowrods.com

    Not oversize, but another alternative;
    http://www.superiorglassworks.com/ca....php?pageid=25 This unit is also sold through Total Performance in Conn. as the "King T"

    Those are off the top of my head, if I can remember any others I'll add.

    You probably need to figure out just how traditional you want to be, and whether you want a 4,6,or 8 cylinder engine. For example, the Speedway deal you referenced is for a 4 or 6, not 8. Yeah, could be modified, but then you lose any advantage of buying their design.

    Normally I endorse the buy someone else's abandoned project with few caviats, but with this kind of car, often being at the entry level of the hobby, it requires a little more scrutiny of what you'd be buying. If the asked for price is right for the accumulation of parts, and you can afford to throw away anything that the previous owner may have fowled up, or that was just junk to start with, and still come out, then it would be okay. Otherwise it could be one step forward, two back.

    As for piss poor business people, they're sending you a message. They may be good craftsmen, might build a good product, but if they don't know how to run their business they may not survive long enough to deliver after you've paid. Heed the warnings!
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.

  4. #4
    Rich King is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Boonton
    Car Year, Make, Model: 1940 Mercury Convertible
    Posts
    13

    WOW...... Not being familiar with Shadow I checked their website to get an Idea as to the pricing on their bodies..... I venture to guess there is much waiting time to get one of these.... A fiberglass bucket body in my estimation would or should top out at about 500 to a grand... I had to read the literature 2 times as I didnt believe my eyes.... A simple Bucket body sells for $9,600 .... If you want the Trunk style body get ready to fork over $11,900.... WOW.... Thats a big markup to go from Glass to steel..... Dont think that they will be selling many of these....

    Im still hoping to hear from anybody that is familiar with Ecoast Cool Cars

    Rich........

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink