Thread: One Way To Build A '32 Hyboy

Tweet

Well, all the plumbing is complete. I can't tell how how glad I am that is over. It's so time consuming and when you are all done you can't see anything. I thought I would show what was involved with the fuel line coolers and the plumbing inside the drivers frame rail.
This is whats inside the frame rail, 2, 24" transmission coolers (now fuel coolers). I welded AN fittings on the inlets and outlets so I could use all AN fittings on everything. Then there had to be a window cut into the frame right at the kick up to slide everything inside. Then there had to be a window put into the back of the frame rail to mount the bulkhead fittings. The other photo is the bulk heads put into the floor to get the fuel lines to the outside. So the three fittings are the main feed line coming out of the tank then feed line going into the frame and then the return line back into the tank.
Ken