Thread: One Way To Build A '32 Hyboy

Tweet

brickman-I use one and sometimes two layers of shrink wrap when I am splitting the harness. Then when it goes into the frame I will either weld tubing inside the frame and slip the wiring in it this giant thick shrink wrap. This stuff is brutal
Don- I use lots of tie wraps because I think it makes it look neat and tidy. I never use electrical tape to cover the wiring. My thinking is, let everything as exposed as possible in case you need to chase something down. But if you are in an area that needs protection use shrink wrap and radius all the sharp corners.
Henry Rifle- Yep I agree.
Steve- No electric seats, I'm using a 1500 series Odyssey battery and a 140 amp alternator. Thanks Steve I think we will be done with the wiring this week. I hope
Mike52- I use these gasket less clamps. The tapered rings are steel and the clamp is stainless. You just put it together and slip in your tubing from both ends line everything up where you want it and tack the rings on, then take it apart and finish welding.
Don- That is a great idea, thanks! I have done that before by accident and never thought of using it as a temporary. I don't think I would do well at the GNRS, there isn't enough billet on it
J.Robinson-Thanks for the kind words, O.K. I will enter this one in the show
Steve- O.K. but I'm going to enter it in your name so I won't be embarrassed
IC2- I think there is a tie wrap monster in the garage
jerry clayton- There is another good idea!
Ken