Thread: The Roofus Special

Tweet

The Rally cars are really doing something for me. I found more pics.

One with fenders!

I finally found one parked next to something that I can use as a size referrence... a Bugatti! It does appear to be really close in proportions.

I dig the low headlights. It looks like a hot rodder got ahold of this one.







I really want a hood and radiator shell in this style for my car.

Now back to my build.....here is where I started the day. A clean table from the firewall forward.



I had to come up with an idea for a frame that would accept an IFS and look good fenderless. Follow along as I work through this thing and see what I finally came up with. ....all of the blue tube is 1.5"

Making a second top rail



The two outer rails will get boxed in and become one.

The lower control arm is going to be mounted on the straight piece that runs parrallel to the motor. The upper control arm is going to be mounted on top of the outer frame rail. The spring is going to be a 1933 ford transverse leaf spring.

My goal is something along the lines of this car except the front suspension will be 5-10 inches farther forward so that I can get the spring pack out in front of the grill shell. I will probably do the splash aprons too (but only in the front, the "framerails" will be exposed).