Welcome to Club Hot Rod! The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.

» Members from all over the US and the world!
» Help from all over the world for your questions
» Build logs for you and all members
» Blogs
» Image Gallery
» Many thousands of members and hundreds of thousands of posts!

YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show

Thread: 1931 Model A Build Started in 2007

       Tweet


submit

Results 1 to 15 of 184

LinkBack
- LinkBack URL
- About LinkBacks
Thread Tools
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

bluestang67 1931 Model A Build Started in... 12-25-2009, 05:28 AM

bluestang67 My wife was not as thrilled... 12-25-2009, 05:36 AM

bluestang67 Well thoughts were I might... 12-25-2009, 05:49 AM

bluestang67 Well before I unbolt the body... 12-25-2009, 06:22 AM

bluestang67 Ok with the roof down on the... 12-25-2009, 06:56 AM

barnsey thats looking great, keep the... 12-25-2009, 07:03 AM

Itoldyouso It looks like the body was a... 12-25-2009, 07:17 AM

bluestang67 Don not only better but I... 12-25-2009, 06:49 PM

1954merc This looks great. I have... 12-25-2009, 07:18 AM

Dave Severson Going along quite well on the... 12-25-2009, 07:43 AM

bluestang67 Frame and suspension that I... 12-25-2009, 08:50 AM

REGs Looking good ...... I've... 12-25-2009, 02:42 PM

broncoholic Hey lookin good subscribed... 12-26-2009, 08:57 AM

bluestang67 Today I will show the front... 12-26-2009, 04:47 PM

bluestang67 I knew I was going to have... 12-26-2009, 04:56 PM

bluestang67 Well after reading directions... 12-26-2009, 05:04 PM

More replies below current depth...

REGs Not to be a ball buster but... 12-26-2009, 05:28 PM

bluestang67 Regs the welds looked fine I... 12-26-2009, 06:37 PM

REGs I'm glad you took this the... 12-26-2009, 07:08 PM

bluestang67 Im just glad it was pointed... 12-26-2009, 07:27 PM

REGs Bobby - I checked the... 12-26-2009, 09:14 PM

bluestang67 This is the left rear fender... 12-27-2009, 07:40 PM

falconvan Looks good, Bobby. That's... 12-28-2009, 05:30 AM

bluestang67 He did a lot off heat... 12-28-2009, 09:49 PM

35fordcoupe I feel a little bit like I'm... 12-29-2009, 07:01 AM

bluestang67 Putting it all together for... 12-29-2009, 08:44 PM

More replies below current depth...

Dave Severson Lookin' great, Bobby! ... 12-28-2009, 07:15 AM

REGs Nice stance, nice chop, nice... 01-03-2010, 07:56 AM

bluestang67 Regs I am getting it going to... 01-03-2010, 08:23 AM

bluestang67 Well this was riding with me... 01-07-2010, 03:26 PM

brickman Sweet work Blustang, very... 01-07-2010, 08:29 PM

bluestang67 Tony glad to hear from ya , ... 01-08-2010, 09:36 PM

MLW360 Lookin good! Lot's of Ford... 01-09-2010, 11:29 PM

bluestang67 MLW that was the theme all... 01-10-2010, 10:24 AM

bluestang67 Setting up 8 inch today got... 01-10-2010, 08:53 PM

bluestang67 New add just found this on... 01-15-2010, 09:42 PM

REGs Nice score!! Regs 01-15-2010, 09:45 PM

bluestang67 Regs its a Lebarron Bonnie... 01-15-2010, 09:59 PM

406Rich Great find Bob...! 01-15-2010, 10:04 PM

bluestang67 Hey Rich now hope one comes... 01-15-2010, 10:10 PM

More replies below current depth...

Dave Severson Lookin' good Bobby!!! Used to... 01-15-2010, 10:45 PM

bluestang67 Ha the plasma was sitting... 01-16-2010, 08:06 PM

bluestang67 Today also picked up some... 01-16-2010, 08:45 PM

REGs Nice score ..... I dig the... 01-16-2010, 09:24 PM

bluestang67 Thanks Regs I was looking for... 01-16-2010, 09:55 PM

Ken Thurm Bobby, As for as I'm... 01-17-2010, 07:56 AM

bluestang67 Ken been seeing that a lot... 01-18-2010, 05:50 AM

More replies below current depth...

REGs Looks good ....... when it... 01-26-2010, 08:59 PM

bluestang67 Great saying was just to new... 01-26-2010, 09:12 PM

brickman Would the spacer on the axle... 01-27-2010, 01:48 PM

bluestang67 Tony the axle is as high as i... 01-27-2010, 02:33 PM

bluestang67 Up in the air again and... 01-28-2010, 07:52 PM

REGs Ah ..... the welding IS... 01-28-2010, 08:01 PM

Dave Severson Best to not exceed 20... 01-28-2010, 08:09 PM

bluestang67 Regs thanks , yeah I am... 01-28-2010, 08:16 PM

406Rich When I built my `33 I used... 01-29-2010, 07:50 PM

brickman I used the same formula on my... 01-30-2010, 09:48 AM

bluestang67 Well this morning I finished... 01-30-2010, 10:06 AM

rc57 Bobby- just to be safe, put a... 01-31-2010, 08:37 AM

bluestang67 rc57 good point and that has... 01-31-2010, 09:00 AM

rc57 :)Good homework 01-31-2010, 09:08 AM

bluestang67 Well its all in mock up . See... 01-31-2010, 08:47 PM

Dave Severson Looks good Bobby!!! Got any... 01-31-2010, 09:44 PM

bluestang67 Well good thing I believe I... 01-31-2010, 10:02 PM

bluestang67 Well next step is chopping... 02-02-2010, 08:28 PM

bluestang67 Got it cut down the 3 inches... 02-05-2010, 08:12 PM

34_40 Nice work Bobby. Patience of... 02-06-2010, 06:15 AM

brickman There sure can be alot of... 02-06-2010, 02:06 PM

bluestang67 Thanks Guys I an still on it... 02-07-2010, 10:14 PM

bluestang67 Worked the WS frame some more... 02-08-2010, 07:18 PM

bluestang67 Been a few weeks since I... 02-22-2010, 09:23 PM

More replies below current depth...

Dave Severson I like the look of the stock... 03-15-2010, 07:26 PM

bluestang67 Dave I sure hope to get some... 03-15-2010, 07:53 PM

Dave Severson Maybe the 'maro...Ranchero is... 03-15-2010, 08:22 PM

bluestang67 Still have the Buick on the... 03-15-2010, 09:03 PM

Dave Severson The Plymouth is one I'm... 03-15-2010, 09:50 PM

bluestang67 Nothing wrong with real money... 03-16-2010, 08:07 PM

bluestang67 Ok a little more update the... 03-17-2010, 08:03 PM

Ken Thurm Looks good, nice to get parts... 03-17-2010, 08:25 PM

itsmeb Are you going to leave the... 03-18-2010, 06:19 AM

itsmeb I have a 1930 Chevrolet sadan... 03-18-2010, 06:24 AM

bluestang67 Steel by far is much safer ,... 03-18-2010, 04:55 PM

bluestang67 Worked on the new top wood... 03-21-2010, 05:12 PM

bluestang67 Also I cheated in one more... 03-22-2010, 08:20 PM

bluestang67 Did some clean up on the... 03-24-2010, 10:16 PM

Dave Severson Still can't get over what... 03-25-2010, 07:39 AM

PRO53 Lookin awesome with the wood... 03-25-2010, 08:31 AM

bluestang67 I noticed the difference in a... 03-27-2010, 04:15 PM

bluestang67 The frame is all ready for... 03-28-2010, 09:18 PM

More replies below current depth...

bluestang67 Going with the original Vynle... 03-27-2010, 04:11 PM

34_40 Lookin' Good there, Bobby! ... 04-11-2010, 04:20 AM

bluestang67 Thanks Mike but your a lot... 04-11-2010, 06:53 AM

34_40 HA! Not when you consider... 04-12-2010, 07:08 AM

bluestang67 Ok we are even :D Want to... 04-12-2010, 10:44 PM

More replies below current depth...

34_40 Trade?... HMmmmm... Not just... 04-13-2010, 05:43 AM

Dave Severson Coming along really nice... 04-11-2010, 06:58 AM

bluestang67 No Dave I am bit by the... 04-11-2010, 04:42 PM

REGs Hey Bobby ...... looking... 04-12-2010, 05:39 PM

Dave Severson The frame is really coming... 04-24-2010, 08:24 PM

bluestang67 Shame is its just going to be... 04-25-2010, 01:40 PM

Henry Rifle Nice build. I'm partial to... 04-25-2010, 03:13 PM

bluestang67 Henry good note to write down... 04-25-2010, 05:31 PM

More replies below current depth...

REGs Hey Bobby, Nothing wrong... 05-12-2010, 08:54 PM

bluestang67 Regs Thanks , don't think the... 05-12-2010, 09:59 PM

Henry Rifle The frame looks pretty... 05-13-2010, 12:24 PM

bluestang67 I knew I remembered seeing... 05-13-2010, 08:45 PM

Henry Rifle Bobby, Just boxin the... 05-13-2010, 09:10 PM

bluestang67 Henry I will make some plates... 05-15-2010, 04:05 AM

Henry Rifle Actually, it was a 454, bored... 05-15-2010, 05:15 AM

bluestang67 Henry , there was some... 05-16-2010, 07:42 PM

REGs Nice ....... well done. ... 05-16-2010, 07:56 PM

bluestang67 Regs we will all see it in... 05-16-2010, 08:28 PM

bluestang67 Well got err done today . It... 05-17-2010, 05:28 PM

bluestang67 Rolls again 05-18-2010, 02:57 PM

More replies below current depth...

34_40 Good Deal Bobby! Great score... 06-30-2010, 05:13 AM

bluestang67 Yeah hope to fire it up next... 06-30-2010, 09:17 AM

PRO53 For once I would like to take... 06-30-2010, 09:21 AM

bluestang67 Yeah I did get a few days in... 06-30-2010, 07:01 PM

406Rich How many more stares do you... 08-24-2010, 07:33 PM

03-15-2010 09:03 PM #10

bluestang67
CHR Member

Join Date

Sep 2006

Location

New Lenox

Car Year, Make, Model: 67 Mstg cpe , 37 Ford Coupe

Posts

2,787

Still have the Buick on the updated frame to ?? 37 Plymouth don't remember this one at all .

Reply With Quote

« Previous Thread | Next Thread »

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

New Forum Posts
- Christine asked that I post the link to Mike's Obituary -...
  
  We Lost a Good One
  
  Today, 01:53 PM
- It's merely the evolution of the conestoga wagon
  
  Montana Mail Runner
  
  Today, 01:38 PM
- Saw this posted on FB, and thought of posting it on the Joke Page as a Model A Donk, but then thought it's not a joke, it's cool!! -
  
  Montana Mail Runner
  
  Today, 10:12 AM
- Mike was a great guy with a lot of knowledge and always had good things to say. May he rest in peace. I hope he's up there playing with hot rods now as well.
  
  We Lost a Good One
  
  Today, 08:56 AM
- Sorry for your loss of friend Mike McGee, Shine. Great trans men are few and far between, it seems. Sadly, Mike Frade was only 66 and had been talking about retirement for ten years that I know...
  
  We Lost a Good One
  
  Yesterday, 01:53 PM
Everywhere sidebar 1.4.1

Powered by vBulletin™ Version 4.1.3
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
Tabs System by vbSoporte - vBulletin en Español
vBulletin Styles developed by vBStyles.com

All material found at Club Hot Rod are copyright protected

Links monetized by VigLink