Thread: `37 pics

Tweet

Here`s a shot of the car just before the tired 307 came out in `03



New 406 going in a week later after the trans was done, although we now have a 670 avenger on it, and ended building my own alt mount down low on the left side, store bought one didnot work, and the hedders interfered with the wishbone, running ramhorns for right now, I`m looking at Sandersons CC11 to fit, I just need one more measurement from them to confirm.

[QUOTE=406Rich;375049]

that's a real cool lookin '37! I hope my '35 sits about the same as that /QUOTE

What front suspension you running 35fordcoupe...?

I chose the magnum weedeater axle, 5.5 drop, with disc`s, vega box thru a GM column, 15 inch rims, rides excellent, no bump steer, only problem is the split wishbone, too low for my scrub line,( speed bumps and they don`t get along) I want to change to radius bars to the side rails maybe next year.

mine has a MII. I was surprised reading you are that low in front with a solid axle. I hope to bolt my front fenders on real soon to get a look at how it sits. are those 15's in back too? what size tire?

These pics have me wanting to go out and swap some cars around Nice very nice .

35 post them up and let me know if they are stock spindle or 2 inch drop Thanks.

35,..... the rear tires are 235/75 r 15`s, fronts are 185/60 r 15`s

Rich a link to my 37 album when i bought it a year ago .

http://rides.webshots.com/album/568115041snlrXu

All my pics are on another pc, that crashed, my kid has it now trying to see if he can pull them out, he`s already told me that it probably won`t happen, if he does I`ll reload on to a site. Your`s brings back memory`s of the way mine was, mine just had a little more surface rust, no motor or trans, the old Gentlemen that sold it to me ( older than me...) used this one for parts. His has been restored to concourse level...

Originally this was sold as a parts car then the owner purchased the frame that had a amateur restore done that's whats in it now . I just bought it for the frame and body . The rest I will sell out as it comes apart .

I picked up my new harness today EZ wire, now I`ll have to go to work, 21 circuit, not that I`ll ever need that many but you never know, somebody I met at one of the swap meets bought a truck load of them a while back, I asked him to hold one and I would get back to him for 133.00, not a bad deal I thought, its just like one that one of my friends put in his `65 chevelle. I also have new gauges VDO quad (4 n one) and a separate speedo, tach and clock to fill the stock holes, hopefully will not have to build retaining rings for them.
Anybody have any advice on wiring, I did my own on the first one, pulled from a `66 chevy pickup, for the most part, but thefuse block is old and brittle now falling apart.