Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Tire size for rear of Camaro
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    street racer is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2010
    Location
    essexville
    Posts
    19

    Tire size for rear of Camaro

     



    Although I've owned many 1979-80 Camaros I remember the backspacing and rim width to run wide tires on the back of these cars.What I would like to know is what is the widest tire I can run on one of these cars that have a complete stock leaf spring rear end set up.I want to run 16" rims but I need to know the backspacing.Thank you.

  2. #2
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    i know that i trim some of the lips out of popeye s dave s Z but do not remember 4 inch back 8 rim with a ??? size tire . i know that with a tape measure and plum bob will work thats the only way i ever did all the cars i did mark ? you were never around? if your know the over all width of the tire pump up on the real rim helps but all can be worked out
    Last edited by pat mccarthy; 11-15-2010 at 08:45 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  3. #3
    street racer is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2010
    Location
    essexville
    Posts
    19

    I remember Popeye Dave,If I get the car I will just have to break out the plumb bob and tape and go for it.Might have to have you double check me though.Thanks Pat

  4. #4
    Flipper_1938's Avatar
    Flipper_1938 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Kentucky
    Car Year, Make, Model: 47 Seagrave
    Posts
    683

    Be sure and check both sides. My 79 Z28 did not match side for side, from the factory.
    There are two things in life where penetration is really important.....and one of them is welding.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink