Thread: trunk rust....
-
01-02-2011 02:17 PM #1
trunk rust....
Does anyone know where I can get new trunk floor pan for my 1967 marquis?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-02-2011 02:49 PM #2
I googled several sources and only came up with this http://www.dearbornclassics.com/catalog2/part/POR24/
I doubt anyone reproduces that floor pan. You might find a good one at a salvage yard or get some sheet metal and patch your old one. The 67 Galaxie might be close enough to interchange if you can find one of those.
Hope that helps some..."It is not much good thinking of a thing unless you think it out." - H.G. Wells
-
01-02-2011 07:08 PM #3
Call a local body shop and ask them where they would get one if a rear end collision came in for repair. They may not show floors for that make and model and you may have to take your trusty sawzall to the local boneyard, as Randy suggests. If this were a Chevelle, Camaro, Mustang, etc, you would have a dozen places to go, but Marquis are not generally a big enough market for anyone to tool up to repop these.
Don
-
01-03-2011 07:29 AM #4
Mercuryman, I have gained a measure of fame for performing some pretty half-a$$ body work in my time, but I once owned a '76 Buick Century Special that we bought new. 1976 was not GM's finest hour as far as body quality was concerned.
When it rained it seemed that more water got inside that car than stayed out. The floorboards and the trunk floor rusted out. Water got under the vinyl Landau top and holes rusted in the roof.
What I'm leading up to is, I finally bought some heavy fiber glass cloth and a bucket of epoxy resin and sanded the areas as clean as I could get them, then I bridged the holes with a layer or two of the cloth then applied the resin.
I mentioned the kind of repairs that I tend to make sometimes, but it worked very well. Admittedly, the fixes didn't look too good, but what the heck? New carpet and a new trunk floor mat can hide a ton of ugly. As for the holes in the roof I got some of that wide aluminum tape stuff and patched over the holes and stretched the vinyl back as tightly as I could and it looked okay.
Well, sort of okay .......
We kept that leaky devil for several more years before selling it to a neighbor for a go-to-school car for his daughter, and yes, I did tell him about my less than professional body work.
If you are making a show car out of your Merc you might not want to go this route, but if money is an object, as I said, it worked.
JimLast edited by Big Tracks; 01-03-2011 at 08:15 AM. Reason: Correction of typo
Thank you Roger. .
Another little bird