11Likes

Thread: Making wiring harness?

       Tweet


submit

Results 1 to 15 of 37

LinkBack
- LinkBack URL
- About LinkBacks
Thread Tools
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

Matt167 Making wiring harness? 05-24-2013, 05:03 PM

34_40 Sounds like a good plan and... 05-24-2013, 05:57 PM

Dave Severson Sounds like a good plan,... 05-24-2013, 06:05 PM

Matt167 I expect I might just break... 05-24-2013, 06:17 PM

rspears You're going to use... 05-24-2013, 06:27 PM

Matt167 I haven't checked to see what... 05-24-2013, 06:37 PM

34_40 Yeah, but - sometimes it... 05-24-2013, 07:32 PM

Matt167 Yea, that's true.. I'm... 05-24-2013, 08:01 PM

34_40 I know for me there are times... 05-25-2013, 01:10 AM

rspears Matt, I agree 100% with Mike.... 05-25-2013, 05:24 AM

Matt167 Yep, it is nice to be able to... 05-25-2013, 06:05 PM

Mike P Matt, I’ve been building my... 05-25-2013, 06:38 AM

Matt167 Thanks for the tips. I... 05-25-2013, 05:08 PM

astroracer Hey Matt, I doubt you will... 05-25-2013, 05:21 PM

Matt167 Got that place bookmarked.... 05-25-2013, 05:56 PM

LIFESTYLZ OK I'll show my ignorance ...... 05-26-2013, 02:14 AM

astroracer This is out of my van... 05-26-2013, 07:18 AM

Matt167 There is also a calculator on... 05-26-2013, 09:57 AM

jerry clayton You might think about... 05-25-2013, 06:33 PM

Matt167 I was considering working... 05-25-2013, 06:52 PM

rspears Matt, It's not rocket... 05-26-2013, 03:59 PM

cffisher But if you don't do your... 05-26-2013, 05:08 PM

34_40 And as long as you use an... 05-26-2013, 05:21 PM

Matt167 I'll attempt to create a... 05-26-2013, 05:42 PM

jerry clayton GM performance parts have a... 05-26-2013, 06:55 PM

cffisher just do your circuits ONE at... 05-27-2013, 04:40 AM

Matt167 That's actually what I was... 05-27-2013, 09:14 AM

LIFESTYLZ What does the relay actually... 05-27-2013, 02:10 PM

Matt167 Relays control a high current... 05-27-2013, 02:41 PM

rspears Un-necessary post. 05-27-2013, 02:53 PM

34_40 Matt, when doing "rough-in"... 05-27-2013, 04:05 PM

Matt167 Good idea. I have tons of... 05-27-2013, 04:34 PM

cffisher with out bread ties so be... 05-28-2013, 06:12 AM

Matt167 Sadly the 3 circuits in the... 05-28-2013, 10:30 PM

rspears A hole in the water that... 05-29-2013, 05:22 AM

cffisher The biggest problem with... 05-29-2013, 06:00 AM

Matt167 Yep I know BOAT stands for... 05-29-2013, 08:55 AM

05-26-2013 05:42 PM #24

Matt167

CHR Member

I'll attempt to create a harness/ circuits with the fuse/ relay blocks that I have ( mounted to plywwod or something ) and if I can get it to work with a car battery, than I will use it in the hotrod, if not I will buy a kit instead of what is needed to complete a home built harness. I have an understanding of automotive electrical, can trace wires with diagrams, make repairs, and I have built lighting harnesses, just never done multiple circuits.

The link to project 33 was just a reply to above. I know how to size wire, and I usually go up ( down one gauge ) one size just because.