Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree188Likes

Thread: Everybody that is currently building a car...
          
   
   

Reply To Thread
Page 404 of 432 FirstFirst ... 304 354 394 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 414 ... LastLast
Results 6,046 to 6,060 of 6479
  1. #6046
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Still working on the trunk of the Buick. Somebody had hid a bunch of ugliness on the floor with a trunk matt glued in over it. Talked about it with Mike and decided this would be a good time to fix it. Some real Mickey Mouse stuff has been done on the car over the years, IE the rear bumpers were only bolted (2 bolts per side) to the lower valence panel..... Good example of make the outside look good and to heck with the rest!!!!

    Had to take a few days off to get some work done on my right eye.... Got a fresh piece of steel in it, so I had that dug out and while he was at it my #1 eye Doc ground off some of the scar tissue from previous damage and one area on the lens that had a black spot on it. Vision in that eye is still a bit blurry, but getting better all the time. Might try a bit of welding tomorrow and see how that goes. Anxious to get back on the Buick, the nasty work is almost done and just about time to move on to the fun stuff!!!!!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  2. #6047
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,717

    Dang it, I HATE when the docs work on the eyes! That's one of the worst.. glad to hear you're on the mend. Sounds like the Buick needed your attention too!

  3. #6048
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Alright Dave, dont make us give you a sermon on the importance of good safety glasses! You're too valuable to the forum, we cant have you on the disabled list!
    lamin8r likes this.

  4. #6049
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,793

    Quote Originally Posted by Dave Severson View Post
    Still working on the trunk of the Buick. Somebody had hid a bunch of ugliness on the floor with a trunk matt glued in over it. Talked about it with Mike and decided this would be a good time to fix it. Some real Mickey Mouse stuff has been done on the car over the years, IE the rear bumpers were only bolted (2 bolts per side) to the lower valence panel..... Good example of make the outside look good and to heck with the rest!!!!

    Had to take a few days off to get some work done on my right eye.... Got a fresh piece of steel in it, so I had that dug out and while he was at it my #1 eye Doc ground off some of the scar tissue from previous damage and one area on the lens that had a black spot on it. Vision in that eye is still a bit blurry, but getting better all the time. Might try a bit of welding tomorrow and see how that goes. Anxious to get back on the Buick, the nasty work is almost done and just about time to move on to the fun stuff!!!!!
    Glad to hear it is getting better. Also slated to undergo knife for torn miniscus, wondered why the knee never got better after cortizone shots? Sorry for hijack!
    " "No matter where you go, there you are!" Steve.

  5. #6050
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    yeah I remember ones the dr. said "Gee thats a realy rusted piece of wood you have in there" Guess I told him wrong.. And I was wearing a face shield then..
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  6. #6051
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,793

    Charlie and Dave- when I went for the MRI this week they asked if I weld, or ever got any metal in my eyes, after a few seconds the hairs on the back of my kneck went up! Don't want to be around a big magnet that attracts metal, and have it suddenly tug small fragments out!
    " "No matter where you go, there you are!" Steve.

  7. #6052
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Quote Originally Posted by falconvan View Post
    Alright Dave, dont make us give you a sermon on the importance of good safety glasses! You're too valuable to the forum, we cant have you on the disabled list!
    I wear safety glasses all the time, occasionally a little piece or 3 will fly up under the glasses and get my eyes. If you do this stuff long enough, you're going to get stuff in your eyes.... I was working in the trunk, so stuff is flying all over, bouncing off the sides, etc.....
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  8. #6053
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    Quote Originally Posted by stovens View Post
    Charlie and Dave- when I went for the MRI this week they asked if I weld, or ever got any metal in my eyes, after a few seconds the hairs on the back of my kneck went up! Don't want to be around a big magnet that attracts metal, and have it suddenly tug small fragments out!
    yeah I've been asked that too. they did a ultrasound first to be sure before the MRI
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  9. #6054
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Yeah, I always tell them just a bit of stainless in my left leg and left arm... and a couple pins in the left foot, other then that nothing to worry about!!!!!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  10. #6055
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,717

    HMmm.. I gotta tell'em stainless steel just above the heart! 8-)

  11. #6056
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,793

    Yikes were full of metal. I told him about the full metal jacket that came off the inside range and bit me in the face. Guy next to me shooting some version of a portable canon!
    " "No matter where you go, there you are!" Steve.

  12. #6057
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    I did manage to get a couple more panels made for the trunk of the Buick. I put a couple tack welds on each of them, but the right eyeball just isn't up to welding yet so that will have to wait!!! Mike wants panels on both sides and the front of the trunk to hide the wheel wells and the ugly side of the quarter panels and package shelf. Haven't done these panels for many years but I suppose I can still figure it out. Crawling around inside the trunk sure is tough on the old knees!!!! Got in the door solenoids, poppers, lake pipes and a few other pieces. Should get the inside of the trunk done in a day or so then I have some beautification to do on the inside of the hood, too. After that, a bit of touch up work on the body and it'll be time for paint!

    Mike's son Chad (guy that owns the Cutlass) found me an engine for the 'Maro. Friend of his raced it last year, then replaced it this year with a bigger one. It's a 383 stroker, steel crank and rods, 12.5:1 SRP pistons, solid roller cam, and a pair of World Products heads ran on E-85. Chad got the dyno sheet with it, last time they checked it the engine showed 590 hp. It comes with a 150 shot nitrous plate system, too. Knowing me as well as they do, Mike and Chad decided they would bring my new engine up here soon-----soon as the Buick and the Cutlass were all back together and painted!!!!!!! They seem to think I might get sidetracked!!!!! So, I guess I don't get to see it till I get a bit of work done!!!!!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  13. #6058
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,717

    Sidetracked ??? Really?? The way you crank out work I find that hard to believe! 8-)

  14. #6059
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,793

    Procrastinators unite! Dave you always seem busy either with work or home projects, I do understand sidetracking too!
    " "No matter where you go, there you are!" Steve.

  15. #6060
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Always busy!!!!! Two projects in the garage and five waiting!!!! Just the way I like it!!!!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink