Thread: Everybody that is currently building a car...

Tweet

Originally Posted by 34_40

I was being kind!!!

Well, thank you for your consideration!!!!! Would you like me to give you a call to come hang out when the grinding and sanding on the next project starts??? I recall how you enjoy that part of a build!

Sure, just bring a couple beers!!




of course.... I'll NEVER collect!

I think my pick-em-up is next, have to do a repaint after last summer's vandalism to it. Then, the Camaro will go on the rotisserie for a trip to the sandblaster, the '66 Impala (a real SS BTW) will come in the garage to begin the repaint project.

While all this is going on, I'm accumulating suspension pieces for the '57 and the Camaro, another busy summer around here!!!!!!

Originally Posted by Dave Severson

another busy summer around here!!!!!!

Ain't nothing better!!! 8-)

Originally Posted by Dave Severson

But I hate going shopping, even for a camera!!!!! I'll get hold of a loner camera and shoot some pics, the Cutlass is a very special build for me knowing it's history and the people involved!!!

It's pretty easy to shop online, Dave. Check this out: Amazon.com: digital camera

Originally Posted by randyr

It's pretty easy to shop online, Dave. Check this out: Amazon.com: digital camera

You may have unleashed the monster, Randy!

Originally Posted by randyr

It's pretty easy to shop online, Dave. Check this out: Amazon.com: digital camera

I'll buy locally from the same place I always get that kind of stuff, includes a class to learn how to use the dang thing!!!!

I bought a $99 P&S as a backup to my DSLR boat anchor from B&H Photo. It was supposed to be a reconditioned Nikon S9100 - but it's a brand new overstock camera that originally listed for $329 Used Nikon Coolpix S9100 Digital Camera (Black) 26248B B&H Photo So far it's doing great - here's a photo of a new baby router that Santa brought me to show some detail of how sharp the closeup are:
++++++++++++++
DSCN2003.jpg


++++++++++++++

Originally Posted by Dave Severson

I'll buy locally from the same place I always get that kind of stuff, includes a class to learn how to use the dang thing!!!!

I think it's great to support your local place! I'm sure they can use your "support" right now so don't delay!
Besides, from all the "pressure" you're getting to buy a camera, you can see this site is like Missouri....the "Show me" state!!

Of course, you know we're just kiddin' around....sorta! You can buy a new camera when you damn well please! But the point is, we all hope it's sooner than later cause you do so much interesting stuff and inquiring minds wanna know!

Heck - I'd even send you my 10 year old Nikon 3200 P&S. It tends to be cantankerous and slow, but still works. FREE!!

Started putting the firewall and cowl back together on the Cutlass. Base of the windshield had some rusted out areas, I also cut out the little vents for the heater and replaced them with a piece of 20ga., re positioned the tubes from the down tubes of the cage to the front of the frame, and welding the new pieces into the firewall.....Nothing real exciting just the usual cut, fit, weld, and grind.....

Originally Posted by Dave Severson

Nothing real exciting just the usual cut, fit, weld, and grind.....

A LOT better than sanding!!!!

Not a hot rod, but I did a van wrap this last week.

WOW!!!!! Very nice work Pro!!!! Had to be a bunch of computer time to get that whole wrap to come out that nice!!!!! There's a number of racers around here that have gone to wraps instead of paint!

Thanks Dave. Yea, there's some time involved in this project. Just got an email, the boss likes it and is going to send over another one.