Thread: Modern Street Rod Truck

Tweet

Whats up guys, ive decided to test the waters on my recently finished project.

Make offer!!!

Mods
-Stock Floor BD. This is a full frame, not just firewall back.
-Scotts Hot Rod Mustang II front suspension.
-Covette rear independent suspension shortened 5 inches per side.
-2 optima Yellow tops
-2 Viair 380s, 8 GC 450 Platium valves, 2 - 3 gallon tanks.
-Air Lift Bags
-13 inch SSBC brakes rear, 11 inch front.
-15 gallon Fuel Cell
-BUILT 383 Stroker, board .060 over, 11:1 compression, Cam is 290 duration/478 lift, Keith Black Pistons, 400 heads,
750 carb, 2500 rpm stall, TH350 trans, Lots of billet and paint on it. 450+hp.
-Shaved out with 3 color leds.
-Leather interior with Sheet Metal dash and fiberglass painted items throughout.
-MA Audio Stereo, lots of it. 4 10's, 3 amps, 10 farad cap, 2 sets of mids.
-Dakota Digital Dual Flame Billet Gauge pod and gauges.
-Chrome Street Rod Steering colum.
-Billet interior door handles, billet mirrors, billet here and billet there.
-Custom Seats.
-One Off Custom Billet Steering Wheel.
-Matching ONE OFF Custom Billet wheels, only set in the world, 20/22 combo.
-Painless Street Rod wiring harness.
-Sheet Metal bed with custom access floor.
-3 color paint.
-Shaved handles, tails, antenna, wipers, gas door, ect.
-3 color Led Tail Lights

Basically all street rod parts with a Nissan body. The Frontier has already been shot for Cover of Street Trucks Magazine, feature in Minitruckin, feature in Trucks, and more to come as time goes by. In its first 2 shows it pulled down awards at both including a Best Of Show. Truck could use some fine tunning but over all top quality work done on the truck.

I am not in a rush to sell, simply testing the waters. Some trades considered. Make offer!!!



http://www.graphicdisorder.com/oneof...motorshot2.jpg

http://www.graphicdisorder.com/oneof...s/IMG_1002.JPG

http://www.graphicdisorder.com/oneof...s/IMG_1138.JPG

http://www.graphicdisorder.com/oneof...s/IMG_1055.JPG

http://www.graphicdisorder.com/oneof...s/IMG_1044.JPG

http://www.graphicdisorder.com/oneof.../frontview.jpg

http://www.graphicdisorder.com/oneof...s/IMG_4383.jpg

http://www.graphicdisorder.com/oneof...s/IMG_4391.jpg

http://www.graphicdisorder.com/oneof...s/IMG_3966.JPG

http://www.graphicdisorder.com/oneof...s/IMG_4394.jpg

http://www.graphicdisorder.com/oneof...s/IMG_4545.jpg

http://www.graphicdisorder.com/oneof...s/IMG_4543.jpg

http://www.graphicdisorder.com/frontier/ecn5.jpg

I like that frame and engine and rear suspension to bad they don't make see through bodies like the RC cars have I like what I see. NICE

my firstborn?

Originally posted by Ed ke6bnl
I like that frame and engine and rear suspension to bad they don't make see through bodies like the RC cars have I like what I see. NICE

Thanks! Ya the chassis is a shame to be covered up. But what can ya do!

Originally posted by firebird77clone
my firstborn?

How much do you think I could sell him/her for? HAHA!

Anyone?

davinci has jack s#!t on you! thats probably the sickest frame ive seen in 10 years. if you havent already, pat yourself on the back. damn nice.

Not my style of truck or nothing but that is a REALLY nice one. The chassis and motor and all is VERY smooth and clean and nice. The body is nice and clean and the color choices are AWESOME! I like that pearl on bottom and that silvery flake on top and then the flames in the center sections it off nicely and doesn't have a million things going on. The interior is nice and plain as well. I am not into mini trucks or nothing but still, I can tell you have TONS of time and money into that and it's just well built. For how much it's worth, it beats me. All I know is that you wont get out of it what you will want and should make.

Thanks guys, my frame guy is really the man here. I simply supplied some cool ideas and some nice parts he made it all work.

Ya i know ill never get what I have in it, you guys can probably guess the kinda of numbers in it. Id be happy to get 25k for it. Ive had some offers close already so we will see.

That is one of teh cleanest trucks that I have ever seen .
Definitely THE cleanest Nissan Truck.
I fear for you that you will only get about 30 to 40% of what you spent on it.
WHy sell? Enjoy it for a while if you can.
For $25 k you can get a decent muscle car or hot rod .

Again,,That is one of the cleanest /nicest customs I have seen but I don't think the interest is there to balance what yo put into it.

If you were going to keep it then it is definitely worth what you have put in it.

I will be looking for teh article on teh truck when I go to the news stand.

BEAUTIFUL!!!!!!!!!!

I'm not into trucks, but man is this a beauty! The undercarriage and engine is "out of this world". Body work on the tubs and rear cover are freakin' amazing!

However, I agree with David. Unless you're going to do this as a business, why sell it? I think the price tag will be more than your average street rodder would be willing to fork out.

Good luck!

Pat

Originally posted by David
That is one of teh cleanest trucks that I have ever seen .
Definitely THE cleanest Nissan Truck.
I fear for you that you will only get about 30 to 40% of what you spent on it.
WHy sell? Enjoy it for a while if you can.
For $25 k you can get a decent muscle car or hot rod .

Again,,That is one of the cleanest /nicest customs I have seen but I don't think the interest is there to balance what yo put into it.

If you were going to keep it then it is definitely worth what you have put in it.

I will be looking for teh article on teh truck when I go to the news stand.

BEAUTIFUL!!!!!!!!!!

Thanks for your nice comments, 30% - 40% would be more than the 25k that id take for the truck, so your probably right. Ive seen less modified trucks in built in the same style sell for that kind of money with less mods/work in it. You couldn't build the truck for what im selling it for, hell just in the wheels, chassis, and motor you would hit that 25k mark. Thats a one of a kind chassis, wheels, and drive train, the only one in the world.... thats worth something in its self.

But yes it wont be an easy sell because its a modern truck rather than a rod. I bet I could get 90k with a street rod body on it.. haha. Funny how that works.... but no big deal. Im putting it out there if someone is interested, great, if not great.

I have 33.01 bucks in my piggy bank!

"I could put a street rod body on it....."

Well, whatatya waitin' for!

Pat

Originally posted by Pat Monaco
"I could put a street rod body on it....."

Well, whatatya waitin' for!

Pat

Ya ya. That would be alot of work!