I hope this all fits, I'm selling my 68, not for the normal reasons, I want to build another one. If your looking for a stock, by the numbers, plain version, stop reading! Mine has been built well and is not stock.Darn near every piece on the car is new or rebuilt.It's a original California,Central Valley car, no rust.She runs and drives better than new, she won't overheat in summer or in traffic, she won't spill coolant on your garage floor or embarrass you at a car show, I converted a 327 coolant tank to an overflow tank and powder coated it. You get all reciepts in a binder. $40,000 or a good cash offer, the ONLY partial trade would be a 35-38 Plymouth 1/2 ton truck.....
So here it is:
1968 427/390 4spd M-21 Coupe..Vin 194378S427562
Power windows and Steering, no air car...
Block 3935439 T0718IC-powder coated orange..
Heads 3937793 + 85427562-powder coated orange..
Block-Heads-Trans and rear end are all matching to the car.
M-21 rebuilt, didn't need it, wanted fresh..
Motor was built, magna fluxed and balanced by Joe Boghosian, Tuned by second generation Corvette drag racer Jim Christianson.
-Holley 850 w/KN air cleaner on a drop base..powder coated
-Torker II intake,polished and matched..
-MSD Billet tach drive Dist and 6AL Box..
-High flow water pump..
-Aluminum finned valve covers powder coated..
-4 core high cap radiator..
-Edelbrock fuel pump..
-Iskederian cam #396750..
-Ram heavy duty kevlar clutch..
-75 amp alt
-Power assist ram with Wilwood steering box
-Wilwood calipers..and lines..
-new discs...
-powder coated front a-arms..
-all urathane bushings and rubbers in suspension..
-VBP 550 1 inch lower springs
-VBP rear 360lb comp spring
-new trailing arms, not rebuild
-new adjustable strut rods
-Edelbrock shocks rear, KYB front..
-front and rear sway bars..
-$100 each U-joints(Cant find the name)!
-aluminized exhaust and Flow Master 40's, mandrell bent...
-All new Vacuum system/switches and related parts...Headlights rebuilt too..
-Re-chromed bumpers...
-All new wiring harness in motor compartment and rear tail section..
-New gas tank and all lines to/from engine, new sending unit..
-New carpet laid over dyna-mat..feet don't get hot!
-Hand sewn seats and door panels..
-Dash top is original and in great condition..
-New seat belts..
-CD player with detach face, 1000 watt Foose amp,2- 10" subs, 2- 6" mids,2- 2 1/2" tweets, all built in one box for easy in/out..
-new Door handles, locks, rekeyed for ignition match..
-new blinker column assembly..
-Torque Thrust II Polished rims, front 17", rear 18" with custom expensive offset, Nitto Tires..
I'm sure I'm forgeting a lot of things, that's some highlights...
Here's what I think are the bad:
-Stupid clock does not work, forgot to check when it was apart!
-Speedo works great, odometer does not, again, ooops!
-Small crack in center of hood, anyone want to guess why! OOps!
-Drivers door light switch puched through a couple of months ago, havn't fixed it..
-I think it needs new glass in rear window, it's got a couple of scratches..
-paint and body work are 8 of 10, better than driver, but not perfect..
Please pm me with any questions, I'm going to leave it on the forum till after Thanksgiving, then Ebay her.....
http://i102.photobucket.com/albums/m...ATVT/001-1.jpg
http://i102.photobucket.com/albums/m...ATVT/002-2.jpg
http://i102.photobucket.com/albums/m...ATVT/003-1.jpg
http://i102.photobucket.com/albums/m...ATVT/006-2.jpg
http://i102.photobucket.com/albums/m...ATVT/008-1.jpg
http://i102.photobucket.com/albums/m...ATVT/013-1.jpg