Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
09-29-2006 01:44 PM #1
CHR Member
- Join Date
- Aug 2006
- Location
- Boardman
- Posts
- 33
How to build a 400 hp dodge 360.
I have a dodge 360 with 10.1 compresion, ported J heads, crane cams flat tappet 284 duration on intake and exhaust with a .480 lift Edelbrock torker intake and a holley 600 cfm and standard vulume oil pump. Do you think this engine is close to making 400 hp? Should I use a bigger carburater? IF i put 1.6 roller rockers on it would it be closer to 400 hp?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-29-2006 01:47 PM #2
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
Maybe someone with a Desktop Dyno will step up......PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
10-22-2006 08:52 PM #3
CHR Member
- Join Date
- Aug 2006
- Location
- Mankato
- Posts
- 48
i ran your motor on my dyno desktop and the results
410HP @6000RPM and 405 ft lbs torque @ 4500RPMs, stout motor!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Great to see your new post, Mike, and great to see CHR up and running again after several days of the Hmmm, can't reach this page.... Also good that you found an easy solution to your storage/access...
1968 Plymouth Valiant 1st Gen HEMI