Newbie to thread with 31' Chevy TUB

[berkelusa]

Hello fellow Rodders!

Rob here in Manchester Cow Hampsha and with my very poor condition 1931 Chevrolet Sedan in the garage turning into a TUB Phaeton,

I could jabber all day about it so thats the reason I made a webpage with HUNDREDS of pictures for y'all to enjoy along with stories and ideas on what I have been up to..

So with out any hesitation, I give you "EVELYN"

http://www.ammoman.com/chevy

Regards
rob@ammoman.com

[awsum34]

Welcome aboard Rob, Nice looking project. keep us updated on it.

[berkelusa]

Originally posted by awsum34
Welcome aboard Rob, Nice looking project. keep us updated on it.

Thanks awsum..

Today 5/19 despite the crutches I pulled the tilt column and steering box from an 86' Buick Regal.., Its column shift but I only need the innards of its for my 87 Monte column that was floor shift.. (and it was FREE)

PS box is fairly small and should fit perfect, It will drive the OEM 66' Van tie-rods in a cross-steering pattern reaching over to the passengers spindle

Holiday weekend starts the stripping of a 305 and auto trans from an 87' Monte carlo for the 31' Chevy

I noticed that the valve covers have 4 bolts vs. the later 85'-UP 2 bolt covers that it should have...

yet all the other stuff is stock?????

3 DAY CHEVY WEEKEND !

Rob

[berkelusa]

Came a long way since this post.. was just looking back on it..

Here is updated pics etc..





Front bowtie ladders for the most part are DONE



Now making rear units..



http://www.ammoman.com/chevy

Rob

[berkelusa]

Workin on the front end now...







Rob