Thread: just wanted to say hi

Tweet

just wanted to say hi.
i found this fourm by looking for a wiring diogram for my chevy tbi.
looks like a cool place to hang out. heres a pic of my ride. still needs paint.
this is what it is
83 chevy s10 blazer 4x4
307 chevy mild build
350 turbo and s10 t-case
dana 30 & front sup. from a 97 jeep cherokee(4link and coils)
dana 44 rear axel
150hp nos (just for fun in the mud )
and soon to have a tbi from a 89 camaro

this is the wiring diagram you wanted nitrous nut, you gonna need to blow it up some how. you want use all of those wires, but if you need any help let me know. a couple of things, is you'll need a 15lb. fuel pump, and if the camaro has a vats(anti theft system) you will have to change the chip in the camputer. i hope you have the wiring harness that goes with that motor.

#2

#3

all i have is the under hood wiring harness intake tbi and computer

thats all you need to install that TBI. thats every wire that goes to that setup and a few extra.

thanks just tring to get all the words to be readable. not going to well
btw is there any kind of crank senser for the tbi

ok ? for you
1-2 do i need these

do you know how to run a ses light

1 is this + or -
2 this to ing +
and the underlined i cant read the colers
thanks i hope this is not to much to ask

Originally posted by nitrous nut
thanks just tring to get all the words to be readable. not going to well
btw is there any kind of crank senser for the tbi

crank sensor in the dist. you'll need the dist. to match your wiring harness.

you are gonna have to have all of the wiring harness to go with this or you will be better buying a made up harness. if you dont understand some of this stuff that might be the way to go. i elimiated some thing you dont need and show you some things you can use off of your s10. the "vats" is the anti theft with the key, the only way i know to get around it is to change the chip in the computer. you need to talk to S&P about that or anybody that sales computer chips.

next