Quote Originally Posted by pat mccarthy
the k36 and the k200 were both are ok not great the 36 i like less on cars that needed much help i shot the k200 up to 220 and went to k36 and finale sanded out to 400 wet and shot dbu dau or dbc over it i never like the DP s much for sealers the k36 was less like a spong that the k200 was so i used it like a sealer and put color in it if i did not want gray
I didnt much care for the DP sealers either , your right it acted like a sponge and soaked up a paint job .

I only use DPLF sealers for a good ground coat now , then do all my plastic work and use the DPS primer over it all .
I still use K36 on home projects though .