-
04-15-2011 10:03 AM #1
What kind of primer are car manufacturers using?
Just listening to the "primer debate " again, which made me think...
What type primer ...Epoxy, 2K, or ???... is being used by the major new car builders of the world?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-15-2011 10:09 AM #2
Aren't some of them being immersed in e coating, especially higher end cars?
Don
-
04-15-2011 11:08 AM #3
the last several jobs i did .. my dodge truck / the pinto / now the stang ... i used the highly recommended urethane hi build yellow primer .. i dont like it a bit better than the old standard red oxide .. doesnt cover sand scratches a bit better ..iv`e used up all my sick days at work .. can i call in dead ?
-
04-15-2011 11:48 AM #4
I may have answered my own question. I found an article on "e coating" from a company called PCI. E coat stands for the electrolosis process... not the type of paint.
It says they are using epoxy or acrylic paints in the e coat process, depending on the area that the products will be used. Sounds like more use epoxy.
-
04-15-2011 11:50 AM #5
the last several jobs i did .. my dodge truck / the pinto / now the stang ... i used the highly recommended urethane hi build yellow primer .. i dont like it a bit better than the old standard red oxide .. doesnt cover sand scratches a bit better ..
-
04-15-2011 11:53 AM #6
high end shops have been using epoxy for 10 years or better. urethane primer is for collision work just like lacquer primer .
-
04-15-2011 05:54 PM #7
i have a friend that builds boats air planes and road race bodys he rolls out the first coat of 2k then he blocks them and shoots the primer on from there
. lacquer or urethane primer i never buried bad body or any thing more then 180 grit on body work and finer for paint . a new car body are still dip most of the hi end stuff they must be using epoxy as some get worked over alot i been told so they have some filler primers some of the bmw stuff was epoxy when i did get new parts . when i did a re paint on a striped steel car they were acid etch then a epoxy like DP the a k2 then a tint primer thinner body primer then the k2 something more like a k36 used for a sanding sealer .then sanded out to 600 then to base . shop jobs we just thined out dp but it was a love hate deal for a sealer . i like to shoot over sanded 600 grit as you did not get any chunky looking paint were the paint shifted when the thinnners moved outLast edited by pat mccarthy; 04-15-2011 at 08:33 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Thank you Roger. .
Another little bird