Thread: applying BC/CC and door jambs etc

Tweet

Originally Posted by pat mccarthy

and you did not ? it.s not clear ??? ok ... paint the jambs and clear wait to dry . i tape off the out side of car when i cut jams in to keep the the clear from lifitng as the base over lap could pull up fresh clear . on the jams i tape them off up to about 1 3/4 from were you want to break it. there trick s to this. you want to be past the edge to shows up like a sore thumb if you see the break with door shut. when your about were you want the soft line you take 2 inch tap or 1 inch can work to you more or less roll the tape sticky side facing the part your paint ing this will face painted side . you stick about 1 inch down in the jam rest will over lap when door shuts tape tabs hold the 2 inch tape sticky part from lapping past the jamb when door is shut . this is the way we did door jams when 3 m did not make the tape . is this better

maybe if you add some pics.....

Originally Posted by randyr

maybe if you add some pics.....

you guy must not be painters ?? your doing the same thing with masting tape rolling it and end up with much like you do with the 3 m soft edge foam tape...... your wheels now turning