Thread: Rattlecan epoxy
Threaded View
-
02-03-2016 12:38 PM #10
I'll have to look into a can of the good stuff.
Meanwhile the Vega got bashed in a parking lot.
I did the grunt work, and his insurance will pay the body shop to finish it out. There was too much damage: insurance wouldn't have covered a proper repair. The inner cowl got bashed in, I pulled that using my stud welder. The bottom of the cowl was rotten, I patched that. Then I bumped the fender out, and found an old rust repair at the bottom corner which had to be redone. So I did all that, and shot the inside of the fender and cowl with the appliance paint, I'm sure it will be fine. Now it's all back together, I've got about ten hours wrapped up in it.
Off to the body shop next!.
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
I wore a camouflage T-shirt once. The response in the pub was "Oooh, it's a floating head!" .
the Official CHR joke page duel