Thread: Ford FE aluminum 4bbl intake manifold

Tweet

any aluminum manifold will be considered, provided it is in good working order.

Should we assume that your looking to buy one? You know what happens when we assume something right? 8-)

If your looking to purchase a used FE intake, try these folks, http://www.network54.com/Index/10214

.

reply to old posts using the search engine? This is all the info available on this post. I did a search, and everything past the first page seems to be dead. see copy and paste below*

I have emailed a few others, thank you

*Offy 360 View thread on Jul 22, 2012 10:54 AM
If your looking for an Offy 360 FE intake, my car currently has one on it, and I will be changing to a Blue Thunder shortly. If your not in a rush for an intake (might be more than a month before I get to the swap, we can discuss price/trade. My e

I am un-sure but maybe you need to join?? I haven't been a regular over there in quite some time..

Found what I needed!!

Originally Posted by 662doorgalaxie

Found what I needed!!

Your Welcome! Glad we could help!

and thanks for coming back and letting us know it worked out for you...

Now to pull the old manifold without breaking off old bolts.

Originally Posted by 662doorgalaxie

Now to pull the old manifold without breaking off old bolts.

HAH! Worse than that, setting it in place and keeping all the seals where they belong.. THAT is the trick! 8-)

hai Karate' commercial. circa 1970

I did one of these on my '65 f100 about 25 years ago, Should not be too much trouble

Originally Posted by 662doorgalaxie

hai Karate' commercial. circa 1970

I did one of these on my '65 f100 about 25 years ago, Should not be too much trouble

There you go! Now Murphy's Law is going to take over!

Let us know how it comes out.

and the water nipple out the front is not usable, it came out very easily

now, where do I find a new one, a search did not help. what is it called?

murphy murphy

things like water nipples for manifolds and water pumps are in the Doeman type stuff at the real auto parts stores

thank you

BTW, this little town only has one "parts" store, they also sell feed and horse tack!

out of ideas, any help here? thank you, 66

On your other thread re; the same topic.. do you have a local machine shop? ask them to duplicate it.. or do you have some micrometers? get measurements and maybe "we" can find one...