Thread: Revtexs 46 ford

Tweet

I appreciate all your work, having been there and done that on numerous occasions.

One thing I would suggest is to lift the front lip of the seat bottoms a little. They won't be as comfortable sitting flat like they are, as they would be tilted up at the front.

Originally Posted by techinspector1

I appreciate all your work, having been there and done that on numerous occasions.

One thing I would suggest is to lift the front lip of the seat bottoms a little. They won't be as comfortable sitting flat like they are, as they would be tilted up at the front.

thanks , that pic was a old one when i fisrt got them, abd i hadnt put the pans in yet, so the feet was hanging thru the floor, i was to tired last night after i put them back in,, so i didnt take a pic, and besides that , if ya noticed i am building this thing in the yard, so i ran out of light,,

well guys i fired it up and drove about 20 feet,, just temp wiring and gas, it ran good,, but its to low it drags!!!!i got to jack it up, the trans crossmember is not as high now that i got the weight on it,, i believe i can jack up the front with more springs, anways here how she looks setting in the drive !!!!

well got my gril chopped down and headlights mounted,, started wiring it up too,, man i am getting really excited!!!

Congrats, I wish I were in the ready to fire it up mode

Originally Posted by scotter

Congrats, I wish I were in the ready to fire it up mode

well i still got some to do ,, and did a little more today!!!heres pics of my 20 buck fuse panel