Thread: Help!!MSD dist. got no spark !!
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
11-23-2004 12:29 AM #1
CHR Member
- Join Date
- Oct 2004
- Location
- san leandro
- Car Year, Make, Model: 1968 chevy caprice
- Posts
- 4
Help!!MSD dist. got no spark !!
Tonight my dad's car stalled at an intersection. I'm unable to get the engine started. It cranks find, has fuel, but no spark at coil output. There's 12 volts at the (+)side of ign. coil with the key ON. When the engine is being cranked, the test light on the (-)side of ign. coil flickers(pulses). Is that normal? I installed the chevy MSD ready-to-run dist. about a month ago. The car ran perfect until it quit today. I got the car towed home. Any ideas if the dist. is the problem or I got a bad ignition coil. Any tips on any more test I can do ? Thanks for any suggestionS. Ray
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-23-2004 12:43 AM #2
CHR Member/Contributor
- Join Date
- Jun 2004
- Location
- Auckland
- Car Year, Make, Model: 69 Holden HT
- Posts
- 818
Got your warranty card ?"aerodynamics are for people who cant build engines"
Enzo Ferrari
-
11-23-2004 11:32 PM #3
CHR Member
- Join Date
- Oct 2004
- Location
- san leandro
- Car Year, Make, Model: 1968 chevy caprice
- Posts
- 4
Fixed it!!
WOO HOO!! Found the problem, it was the ign. coil. I didn't replace the coil when I installed the new distributor. Just put in a new msd blaster 2, and it fired right up! I didn't think a coil could go out, but it did. It was one of those cheap chrome Accel super stock coils(crap).
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Getting closer on this project. What a lot of work!
Stude M5 build