Thread: Ground issues
-
05-30-2005 02:25 PM #76
Truck is not running... Just checked the inj's the CORRECT way!... I have .04 on the 467 & 468. The only reading i get out of D16 & D14 is a -1, otherwise I get no reading at all"Speak softly and carry a big gun!"
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-30-2005 02:27 PM #77
sorry, did not test the D pins right. I will do that and let you know"Speak softly and carry a big gun!"
-
05-30-2005 02:29 PM #78
Originally posted by Fonzy
Truck is not running... Just checked the inj's the CORRECT way!... I have .04 on the 467 & 468. The only reading i get out of D16 & D14 is a -1, otherwise I get no reading at allMike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
05-30-2005 02:32 PM #79
Yes, I have both."Speak softly and carry a big gun!"
-
05-30-2005 02:35 PM #80
Originally posted by Fonzy
Yes, I have both.Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
05-30-2005 02:42 PM #81
I'm going to check it again but last time i checked it, it didn't come on at all when I tried to start it. I'm going up in a few mins to check it again though. My girlfriend is going to be a relay between the home computer and me at Wal-mart..."Speak softly and carry a big gun!"
-
05-30-2005 02:43 PM #82
BTW I checked the D16 and D14 against a ground and didn't get any reading..."Speak softly and carry a big gun!"
-
05-30-2005 02:46 PM #83
need to know what the noid light is doingMike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
05-30-2005 02:56 PM #84
Noid light does not come on at all... Just like the first time..."Speak softly and carry a big gun!"
-
05-30-2005 02:59 PM #85
check red wire at inj. with key on with test light. is light on?Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
05-30-2005 03:08 PM #86
Yep, it's on."Speak softly and carry a big gun!"
-
05-30-2005 03:16 PM #87
disconnect the 4 way plug at the dist. take the 12v test light and hook it to the postive side of the bat. and touch the purple/white wire going to the computer with the test probe end of the light light. ever time you touch it the noid light should flash.Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
05-30-2005 03:22 PM #88
Noid light is flashing."Speak softly and carry a big gun!"
-
05-30-2005 03:26 PM #89
if everything check the way you say it does then you either have a bad plug at dist. or the module is bad. id say module.Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
05-30-2005 03:37 PM #90
He's on his way to AutoZone now, to see if he can pick up a module...then he'll let you know what happens!
Thanks a bunch for your help, I know he appreciates it!
~Fonzy's girl~"Speak softly and carry a big gun!"
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance