Thread: hmmm my favorite WIREING

Tweet

SO AFTER A LONG EXHAUSTEING GROUND WIRE SEARCH AND REPAIR MISSION AND BEATING ONES HEAD AGAINST DRIVEWAY AND FRAME AND BACK AGAIN!!!!! HEY AND THATS THE FUNNY PART.


START OF THE PROBLEM: TURN SIGNAL CAM SHORTED OUT ON THE WAY HOME SPARKES AND THAN THE REGULAR AHHH #@$$#@$ NOW WHAT THE hE!@# IS GOING ON....


LOST BRAKE LIGHTS (BOTH SIDES) AND PASSENGER SIGNAL LIGHTS FRONT AND REAR....

REPLACED TURN SIGNAL LIGHT CAM GAIN BACK FRONT PASSENGER SIGNAL LIGHT.

STILL HAVE NO REAR PASSENGER BRAKE LIGHT OR SIGNAL LIGHT..

MY THOUGHT WAS DEAD SOCKET..UNTIL I WENT TO STOP ONE NIGHT AND SEEN THAT THERE WAS NO BRAKE LIGHT PERIOD ON EITHER SIDE( ONLY DRIVERS SIDE WORKING).. AND STILL NO REAR PASSENGER SIGNAL....SO I CONSULT ALL MY WIREING DIAGRAMS FOR TWO DAYS AND COME TO THE CONCLUSION IM MISSING SOMETHING...

ANY IDEAS GUYS IM LOST HERE

Have you done any continuity tests on the circuits in question? Like from the turn signal switch to the relay, and from the relay to the socket?

Check the continuity of the ground from each socket first then check the other parts of the circuit.

Also, did you check the bulbs to make sure they weren't blown?

I once spent a few days trying to figure out a sporadic taillight problem and I finally tracked it down to a bulb that would only work intermittently.

just replace the signal assembly in the column.

* hope you win that race *