Thread: Codeless Ford
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
09-07-2003 12:20 PM #1
Registered User
- Join Date
- Sep 2003
- Location
- Denver Colorado
- Car Year, Make, Model: 1956 Ford Fairlane
- Posts
- 1
Codeless Ford
Hello,
This is our first post, and hope someone out there has an answer.
My son and I installed a 5.0 Ford engine (Edelbrock performer heads and performer plus cam), EEC-IV injection and AOD into our '56 Ford Fairlane.
Used and followed the instructions from Ford Racing for their harness.
Starts and runs well most of the time. Problem is, there is an intermittent stumble at cold start idle. Real problem, code reader cannot pull any codes from the diagnostics. The code reader works fine on my other Fords.
Any ideas out there will be greatly appreciated.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-07-2003 01:50 PM #2
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,869
One of the members on this site is Ghostwheel Technologies, near you. Might be worth contacting him. Here's a link to his site.
http://www.ghostwheeltech.net/Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thank you Roger. .
Another little bird