Thread: Angle of the Dangle
Results 1 to 4 of 4
LinkBack URL
About LinkBacksThreaded View
-
10-31-2005 01:18 PM #3
Moderator
- Join Date
- Apr 2001
- Location
- St Cloud
- Car Year, Make, Model: 48 GMC trk & a 66 Rolls Royce
- Posts
- 532
Well - you should get a lot of opinions on this subject.
I set the motor & pinion angles with the car at ride ht.,since it appears that you are not changing the suspension, but only the motor, it should be simple to measure this before you start.
I set the engine to get the carb level(usually 3 degrees down to the rear). I then set the pinion at the same angle (up at the front from horizontal).
DonDon Meyer, PhD-Mech Engr(48 GMC Trk/chopped/cab extended/caddy fins & a GM converted Rolls Royce Silver Shadow).
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
A travel agent was sitting at his desk when he noticed an elderly couple standing outside, gazing longingly at the posters of dream vacations in the shop window. They looked sweet, and honestly, a...
the Official CHR joke page duel