trunk mounted battery

[Albrainya]

hey guys, heres the question i have: with a trunk moounted battery, running 1 gauge wire, how do you protect the main feed ? how do you fuse the circuit at the battery incase of shorts in the battery cable? what im looking for is, who sells a device which can carry the amp load for the entire vehicle, and protect from fire if the battery cable shorts out? and what amperage fuse/ circuit breaker is reccomended for that application??
Thanks, Dan

[Bryan TTM]

run it thru a garden hose....proper routing will prevent shorts

[Albrainya]

I dont have the room to run something that thick- have to fuse it

[firebird77clone]

so figure the max amps the system will pull, then fuse it 10% higher. Put the fuse block next to the battery.

[pat mccarthy]

Originally posted by Albrainya
hey guys, heres the question i have: with a trunk moounted battery, running 1 gauge wire, how do you protect the main feed ? how do you fuse the circuit at the battery incase of shorts in the battery cable? what im looking for is, who sells a device which can carry the amp load for the entire vehicle, and protect from fire if the battery cable shorts out? and what amperage fuse/ circuit breaker is reccomended for that application??
Thanks, Dan

get a battery switch from a boat or drag use . on and off switch .then you not would need a fuse you have a switch and i use O gauge welding cable and clamp it to the frame with rubber coated steel clamp mount it down on the frame and it will be fine keep it a way from hot stuff and pinch points and i ues a PVC grommet they are thick wall keeps the battery cable from getting abraded for any bulkheads

[R Pope]

I put the starter solenoid in the trunk, right beside the battery. That way, the big cable is only "live" when the starter is engaged. Much easier to run the smaller wires safely, or fuse them.
Be sure to run a large ground wire directly to the engine.