-
11-15-2005 09:58 AM #1
fuel injected 305 to carb 350 swap
the problems not so much the motor swap but the trans mission. The motor is a mild built truck 350 bord .030 over and has a mild cam. the trans that came off the moter was a muncie 4 speed. my truck had an 87 305 with a 700r4. the problem is the flywheel from the auto trans doesnt fit my 350 crank.doeas any one know of a flywheel I could use that would bolt to my crank and be able to use the stock torque converter?
p.s the truck is an 81 chevy fullsize so emissions and inspection do not concern me.
any help is apreciated thank you
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
I tried rubber isolators between the frame and pump, but it made little difference. I don't mind spinning the motor over to refill the carb(s), it allows time to build oil pressure, jmho..
1968 Plymouth Valiant 1st Gen HEMI