1937 ford truck ?

[plugs]

what is the deal with the sheetmetal on the 37 ford truck i see 2 different sheetmetal configurations on the front is this like the 55 chevy series 1 and 2 or something else and if it is custom work how is it done as in matching body lines and width length thanks

[shine]

there is only 1 37 truck. not sure what your talking about.

[plugs]

there is one set of sheetmetal that looks like the car sheetmetal with head lites inset into the fenders and another with head lites bolted onto the fender.

which is the one that you refer to as original equiptment? if the 37 car sheetmetal is not oem how is it fabricated to meet with the bodylines and contours of the truck cab sheetmetal to look factory thanks.

[plugs]

http://autohobbypage.com/cgi-bin/02/...pbo/nat167.jpg

http://autohobbypage.com/cgi-bin/ima...l98/hal100.jpg

here are the differances i am talking about thanks

[shawnlee28]

pic 2 looks like a custom job or already custon from the supplier,I may be wrong but the first pic looks factory,its so hard to tell on the older stuff,since there is soo much customizing done to the ones u do see at the shows,its hard to tell if its exactly stock or?

[R Pope]

The blue one has had the car front end put on it, I think its a bolt-on job, or nearly so.

[shine]

the lower cowl panel has been replace with one from a car.

[techinspector1]

Originally posted by R Pope
The blue one has had the car front end put on it, I think its a bolt-on job, or nearly so.

Exactly. I talked to a guy at a show in Las Vegas one time who had done this. Bolt-on.