Thread: carb leaking
-
01-06-2006 12:10 PM #1
carb leaking
Ok, i just installed a carter carb on my engine, and after letting the fuel pump run to fill up the bowls, it started leaking like crazy at the very top. There is a hole on either side, they are weird shaped, and then it starts leaking out of there.
Also, when i turn off the pump, the carb makes like a sluping sound. Im figuring this might need a rebuild, but was wondering mainly why there is fuel coming out the top.
thanx
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-06-2006 12:18 PM #2
sounds like you forgot to set the float<~~~~ yes thats my car..mmhhm its steel..( what else is there?)
Dan
-
01-06-2006 12:20 PM #3
it was used for just like 5 miles right out of the box, and then put back, so i didnt double check that, but ill do that. Im use to holleys so im trying to learn these.
thanx
-
01-06-2006 12:30 PM #4
also have to be careful thse carbs dont like much fuel pressure4-6 psi i think<~~~~ yes thats my car..mmhhm its steel..( what else is there?)
Dan
-
01-06-2006 12:39 PM #5
It could be that you are plugged up and it needs an escape valve, which it is getting out the top. But then again I havent taken a car engine apart yet like you guys all (probably) have, I had to confine it to the 4hp engines they had in shop class last year.
-
01-06-2006 01:23 PM #6
i am at 5 psi fuel pressure. Rico, i havent got that far yet either, hopefully this year.
thanx
Ok gang. It's been awhile. With everything that was going on taking care of my mom's affairs and making a few needed mods to the Healey, it was June before anything really got rolling on this...
My Little Red Muscle Truck