Thread: making spoiler...
Results 1 to 8 of 8
LinkBack URL
About LinkBacks-
02-26-2006 06:49 PM #1
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
making spoiler...
ok i want to make a pro stock style wing (only not as long) for my 84 camaro. im thinking of using a couple of pieces of sheetmetal instead of just 1 thick one.
how thick should the wing be? and does anyone have any tips for me?
thanks guys
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
02-26-2006 08:49 PM #2
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
Don't use sheet metal, use aluminum......find some good study aids for fabricating and study a lot before you even start building.....Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
02-26-2006 08:50 PM #3
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
why not sheetmetal?
-
02-26-2006 08:57 PM #4
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
too heavy, looks tacky. I like the polished or brushed aluminum better. JMOYesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
02-26-2006 08:58 PM #5
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
of definitely but i know where i can get pieces of sheetmetal big enough and i have no idea where to get aluminum or how much it would cost
-
02-26-2006 09:06 PM #6
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
and i dont plan on using very thick sheetmetal
-
02-26-2006 11:03 PM #7
CHR Member
- Join Date
- Sep 2005
- Location
- Hamilton
- Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
- Posts
- 3,900
20 ga - 18 ga steel, paint it up nice.
Stay away from pop rivets, but if that's what you got to use, just use a bunch of them, and don't skimp on the reinforcement washers. Lots of little 1/4" zap screws would hold it nice, and give it an 'in your face' fabrication look. Spot welds would give it a clean look, just use a bunch of them. ( drill holes then weld them in, grind them smooth )
Use at least three inner ribs along with the two outer cap ribs. Hammer forming can give you exceptional quality on your pieces.
Use epoxy along with the fasteners.
If you bolt down to a trunk lid be sure to reinforce the attatchment points from the inside. If that thing comes off at speed, it could be tragic..
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
-
02-26-2006 11:04 PM #8
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
thanks man im going to go get some sheetmetal as soon as i get paid
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I wanted to complain about this NZ slang business, but I see it was resolved before it mattered. LOL..
the Official CHR joke page duel