Hey Mike,

Tried everything that you said and still no brakes I tried something I saw on a webpage that said to take the caliper off and hold it up to try and get the air out of the lines, and it seems to me that there is no air for when the pedal was pumped it has just enough pressure left that if you crack open the bleeder that the fluid comes out, but when its closed the caliper will barely move. One more thing , I took the brake line off the caliper and pushed the brake pedal and the fluid shot out. It seems that when its hooked back to the caliper there's not enough pressure.

Should the brake lines be hooked up on the master so that the back runs to the front and the front to the back, cause thats how this was set up