Thread: Pinion Seal Replacement
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
08-23-2006 09:25 PM #1
CHR Member
- Join Date
- Nov 2004
- Location
- East Lyme
- Car Year, Make, Model: 23 T-Bucket
- Posts
- 37
Pinion Seal Replacement
Need some help! What is the correct procedure for replacing the pinion seal in a '59 Ford 9 inch rearend. Thanks in advance for any help.
HarryF
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-23-2006 10:29 PM #2
CHR Member
- Join Date
- Aug 2004
- Location
- rustburg,
- Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
- Posts
- 4,093
remove drive shaft, count the turns of the pinion nut when you back it off, tap the yoke off, knock the old seal out, and new seal in, install the pinion nut the same amount of turns as you took it off. put a little grease on the new seal. take a punch and punch the pinion threads after you get it tight.
Originally Posted by HarryF
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
08-24-2006 06:52 AM #3
CHR Member
- Join Date
- Nov 2004
- Location
- East Lyme
- Car Year, Make, Model: 23 T-Bucket
- Posts
- 37
Mike, thanks for the info. I really appreciate it.
HarryF
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thanks guys! One more trip around the sun completed. Lots of blessings and things to be thankful for (like still being able to type this message!!) Here's to us "over 70 guys.." Glenn
HBD Glenn!!