Thread: willys coupe

Tweet

When Kenny Davis gets back from SEMA, he can comment on his Willys body and the effort required. Here is a pic of his car. It is considerably better than most.

Willys are expensive to build. That is why you see finished ones for sale for between $60,000 and $90,000.

hah. I'm not the lone wolf I thought I was. I have a 41 Willys from Antique and collectable. The body is absolutely flawless. No kidding People ask me who painted it and I say it is natural gel coat. That asside. it gets darker.
I didn't like the rear suspension (pro street frame) so I cut it all up and installed a true 4 link which I made myself. I added my own shock mounts and panhard rod. I changed the front end around a bit to better fit the Mustang and prepare it for power steering if the mood arises. Made my own transmission mount. Sectioned 4 inched vertically and horizontally out of the transmission hump so there is room for my size 12's. Installed my own glass and power windows. windshield wipers etc. Made my own radiator mount for a horizontal aluminum radiator which I got as a universal GM so I had to make mounts and brackets.
I reworked one door which fit but not what I thought it should. 8 hours alone.
I then had to rework the headlight buckets which are repops and supposed to bolt right in. hahahahah. Something you have to do when building a Willys is learn to laugh a lot. Just remember it is good for the face muscles. haha

oh yeah. I asked around about how the front wheels would fit since the Ford stuff is pretty close. and the Willys is a good bit narrower than a 34 Ford. The master Mustang front end supplier said no problem and don't even consider narrowing the A-arms. WTh. the tiree hit the fenders. Now lo and behold it is common to use narrow A-arms on a Willys..front end geometry be gone to hell... hahah keep laughing.
Ever notice how many of the Willys steering columns look like you are driving a bus??? Didn't want this oh no oh no. Guess what the reason is that the typical GM steering column runs righ into the SBC head and headers when you straighten the angle out. Got the fix for that cut it up and shorten it. a few u-joints, couplers, double D shafts, and supports, custom dash mount $250 hahahahaha two days later.

I wan't going to pay 550 for a cheap casst repop grill so I made my own out of aluminum tubing. Well 40 bucks for tubing not bad 50 hours labor....lets see */-+ a little math senior in high school should be able to figure this out. dang $11 and hour. sob I made more in 1970 at a gas station filling tanks.. hahahahahahhah.

This get's even better hahahha hohohho Next summer my beloved Willys is to be sold.

and guess what?????

I'm going to build another one. gauddam there is a crazy guy on chrf hahahahahhahahahhahahahahahahhahahahahahahahahahahahahahhahahha