Thread: No power...
-
01-03-2007 02:53 PM #1
No power...
Just dropped a rebuilt 350 into my 85 Trans Am, everythin ready to go but I am not getting any power anywhere. The battery is good, the engine and upper/lower frame ground out. But nothing inside the car grounds (inside light). the starter wont even crank over and I'm stumped. Lol.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-03-2007 03:26 PM #2
Just a few reminders. Check the fuses. You've got to have power if the key is on and the fuses are good and it is wired right. Just food for thought.
-
01-03-2007 03:30 PM #3
My guess the altinator lead is not on at the starter??? Or at the batteryCharlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
01-03-2007 03:42 PM #4
All the fuses are good. but there is no power even without the key on...
the altenator lead....???
-
01-03-2007 03:45 PM #5
There is a RED wire that comes from the starter or the battery that goes to your fuse box. If this was left off you would have no power. Depending how the car is wired it may come from the altenator.Charlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
01-03-2007 04:10 PM #6
Ah yes, thank you very much thats what I was... I had that lead on the wrong spot on the starter.
thanks guys.
I wanted to complain about this NZ slang business, but I see it was resolved before it mattered. LOL..
the Official CHR joke page duel