Absolutely correct, SBC.

I have a template that is quite similar to the Speedway kit and two different style mounts for the center pivot. One mounts on the rear of a 9" Ford housing brace (I use a full length rear brace on all my big horse stuff), and the other mounts off three of the bolts that attach the center section to the housing. On street cars I usually use aluminum tubing (7075 T6) for the tubes, it's light and strong for straight line loading and looks great when polished up!!!!! Take a look at the kit Speedway offers, and get that new plasma arc to work!!! I would recomend either 1/4" or 5/16" plate for the center pivot and frame rail mounts and of course grade 8 for attachment hardware..... On my big horse stuff, I make all the frame bracketry and center pivot out of chrome moly plate. Probably a bit of overkill, but I hate breaking things!!!!!!