Thread: got my home made muffler done

Tweet

well guys, $51 and a few months later, I took all the parts for my home made muffler, and built it. cut the 3' length of 2.5" pipe, cut it to 24", took the 3" Id/ Id slip connector I bought and the other connectors I bought. I drilled 192 1/4" holes in the 2.5" inner pipe ( 1 hole per inch, 8 rows of holes ) slipped it togther and welded it up, ground off slag, then welded again. now it needs a little paint and it will be good to go. hopefully it actully changes the sound, dosn't need to muffle ( turbocharger will do that ), but I don't want it to sound like a cummings diesel pickup.

Well wheres the pics?

hang on. I do need to 3m wiz wheel the welds to make them nice still, then paint it.

here it is, yes I know I drilled holes in the outlets where there shouldn't be, I got carried away with the drill press, and didn't realise what I had done till I put it togther but I can fix that by slipping the actual exhaust pipes over the muffler, I kno they should be inside but, I'm welding everything so no worrys.

oh, yes I did weld my name into it, had to use up the rest of the last stick some how. lol

nice! very custom.... seeing as it has your name on it and everything