Thread: Leaking rear axle seals
Results 1 to 4 of 4
LinkBack URL
About LinkBacksHybrid View
-
05-28-2007 08:30 PM #1
CHR Member
- Join Date
- Aug 2003
- Location
- McCONNELLS,S.C.
- Car Year, Make, Model: 65 CHEVY C10 PICKUP
- Posts
- 20
Leaking rear axle seals
I have a 1965 Chevy pickup and the rear seals are leaking. Can anyone help with how to replace the seals? I thought the axles could be just pulled out but it looks like I have to remove the rear end housing to remove the axles. Any help would be appreciated.
-
05-28-2007 11:20 PM #2
CHR Member
- Join Date
- May 2004
- Location
- so.cal
- Car Year, Make, Model: 66 c 10 fleetside longbed
- Posts
- 1,942
You need to open the rear end/remove the pin in the center of the back ,by taking out a bolt that holds the pin in.Then once the pin is out ,you need to push the axel towards the center of truck and there is a c shaped washer holding the axel in.then the axel will pull right out.Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
-
05-29-2007 06:25 AM #3
CHR Member
- Join Date
- Aug 2003
- Location
- McCONNELLS,S.C.
- Car Year, Make, Model: 65 CHEVY C10 PICKUP
- Posts
- 20
Thanks for the help I will start on that this weekend. The way you explained it's pretty simple I hope.
Thanks
-
05-29-2007 11:18 AM #4
CHR Member
- Join Date
- May 2004
- Location
- so.cal
- Car Year, Make, Model: 66 c 10 fleetside longbed
- Posts
- 1,942
The gears on the pin need to come out too,you just simply rotate the carrier,wheels off ground.Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
A travel agent was sitting at his desk when he noticed an elderly couple standing outside, gazing longingly at the posters of dream vacations in the shop window. They looked sweet, and honestly, a...
the Official CHR joke page duel