Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Vega subframe connectors I need them!
          
   
   

Reply To Thread
Results 1 to 7 of 7
  1. #1
    Nuckollsinc is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2007
    Location
    Appomattox
    Posts
    26

    Vega subframe connectors I need them!

     



    Anyone know where I can get some? I have been searching everywhere.
    Thanks Eric

  2. #2
    gassersrule_196's Avatar
    gassersrule_196 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2004
    Location
    Lawrence
    Posts
    3,261

    me to !


    75 gt !

  3. #3
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Just get some rectangular tubing and make them. If you want the car tied together even better, instead of just hanging them under the floor pan, cut a notch in the floor and let the ties protrude about 1" above the floorboard, then weld them to the floor, too. Also helps to run a brace the same size as the frame ties over to the point on the floor where the rollbar will weld in. Weld this brace with a plate on it to the inside of the rocker. As for size on the tubing, 2X2 or 1 1/2 X 3 inches works well, doesn't have to be a real thick wall, 11 ga. would do fine.
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  4. #4
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    Here's how one guy made his own...
    http://www.cardomain.com/ride/2242503/3

    Posted by Dave:
    "cut a notch in the floor and let the ties protrude about 1" above the floorboard, then weld them to the floor, too."
    I agree this is the best way.
    Last edited by techinspector1; 06-08-2007 at 12:15 AM.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  5. #5
    djv8ga's Avatar
    djv8ga is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Phoenix
    Car Year, Make, Model: 1972 Chevrolet Vega GT
    Posts
    149

    Chris Alston sells them. If you go to h-body.org and check out the forums, you will see some other designs also.
    Wayne.

  6. #6
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    It's amazing how much rigidity subframe connectors add to a car. When we did the Capri, we could jack up one corner of the car, and the entire front or rear would raise up. Before that, it would just twist like a pretzel.


    Don

  7. #7
    Nuckollsinc is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2007
    Location
    Appomattox
    Posts
    26

    I tried chris alston and bingo I dont know how i missed that site.
    Thanks Eric

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink