Thread: Delco distributor question

Tweet

I have a 327 sm blk chev in a 1972 chevelle. Was in need
of a distributor, and a friend gave me one, however every
thing looks ok, except it has a plug in the back for 4 wires.
I don't know, but this is probably for a computer or something.
MY question is, before i install this will it work on this old
car?

Give us some more info:
Is it an HEI (big diameter cap with coil in cap)?
If so, take the cap off and look at the ignition module.
How many pins does it have (probably either 4 or 7)?
If it has 7, is there 5 on one side and 2 on the other OR is
it a 4 on one side and 3 on the other?
What is the number on the distributor (stamped on the casting)?

mike in tucson

Robot, i will check it out and let you know. Thanks
for the reply
rdobbs

Robot, it is an HEI big diameter cap with coil in cap.
it appears to have 4 pins on one side and 3 on the
other. the casting # 1103465

Which one of these modules does it look like?

Robot, it is simular to the one in the upper right hand pic,
however mine is set up in the following way.
four wires coming from the plug, three plug into the
module, and one to ground. the module which handles
the coil, has three wires, one is ground and the other
two plug into the module. this module in turn is plugged
into the module which has the four wires.
r dobbs