Thread: What are these off of????????

Tweet

I bought these rotors along with chrome spindles and calipers a while back (used) and we are going to use them on my Kids T bucket. The rest is in nice shape, but he wants to replace the rotors. However, they are not like any of the mid size Chevy ones we have been able to find at the auto parts store. They have a unique "hat" that bolts onto the rotor from the back, and all the other ones we see have just the end of the rotor there.

I know they are some GM product, but what???? Any body seen these before??


Thanks,


Don

GM old type 67-68 gto all mid size and nova camaros 49-53 car spindle

Really????? So the auto store should be able to find them from that series??

Thank you Pat.

Don

Originally Posted by Itoldyouso

Really????? So the auto store should be able to find them from that series??

Thank you Pat.

Don

NO you will just get a cast one pice rotors that will replace this two part one with a rotor that will start from 67 to 72 A body or 73 grand prix and nova from 67-70 or so same with the camaro

You 'da man!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I knew what the spindles were, but we had never seen two piece rotors like these.


Thanks again Pat.


Don

The calipers are chromed, and only have one piston in each.........would that be regular GTO stuff too???


Don


Denny, your new avatar is scarey! lol

Originally Posted by DennyW

Cool Pat !! You sure rattled that off quick.

Also, in your last photo, if you look close, you may still be able to see the rotor numbers.

well i had a set of them on my 34 with the z28 4 pistons brakes god that was back in the late 70s

if they can be saved there worth some $$ to some that wants that rotor on there restored car i think they may make them like this now from some one like year one .but you will not get them at the auto parts store .i allways like the look of them. when i put the brakes on the front of my gto. i was thinking i would get them but just the one pice ones

the one pice ones will be close to what you have .i would just get one put it on the other spindle and check it? would say not much if any

Cool.


Don

well thanks don. i am glad i could help out