Thread: How am I going to prep this body for paint?

Tweet

Thanks for all your input, it is a big help.

This is what I am doing.
I used 3M scotchbrite wheels on a die grinder and took almost all the rust off. No way to get in between welds and into closed areas, but I got all the exposed rust, inside and out of the body. 4 days with the compressor running constant. I am pretty happy with the results and very happy with the condition of the body. I know every inch of it now and have started the body work.

At some point soon I will be using one of the phosporic acid metal converters on every surface. With a tricky little spray hose I am going to get as much of the hidden areas as I can and then call it good.

Then I will prime it with an epoxy primer and that should be an excelent, not perfect, but an excelent base for a decent paint job (or at least primer) for several years.

Any recommendations on the rust converters?

The picture of the louvers shows one done and the other in its original "30 years in a backyard" patina.