Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree379Likes

Thread: Project Special K
          
   
submit
   

Reply To Thread
Results 1 to 15 of 1041

Hybrid View

stovens Project Special K 11-10-2007, 10:03 AM
Itoldyouso Steve, I have an F1 or F100... 11-10-2007, 10:10 AM
stovens Thanks Don. I better tell... 11-10-2007, 10:47 AM
stovens Special K 11-11-2007, 10:58 AM
stovens 48 Ford and Service 11-13-2007, 10:58 AM
johnboy Don, I'm quite literally the... 11-13-2007, 11:52 AM
stovens Well the adapters for the... 11-16-2007, 05:40 PM
oldtrucker Steve at least you don,t have... 11-16-2007, 08:10 PM
stovens Well I hope Don and the boys... 11-23-2007, 12:42 AM
halftanked I know it may not seem that... 11-23-2007, 04:00 AM
stovens Thanks Hank. I find putting... 11-24-2007, 12:07 AM
stovens Well Friday was a good day. I... 12-03-2007, 01:24 AM
stovens Update.Almost needed a... 01-25-2008, 07:08 PM
Mike P Although free would be good,... 01-26-2008, 01:12 AM
stovens Lightening up a 429/460 01-27-2008, 10:09 PM
stovens Today we finaly had beautiful... 01-28-2008, 04:06 PM
kitz Steve I used Painless in my... 01-28-2008, 04:20 PM
Itoldyouso Sounds like you are making... 01-28-2008, 04:24 PM
Dave Severson Looks like some fancy train... 03-02-2008, 08:56 PM
stovens Dave were not sure about... 03-02-2008, 08:59 PM
Dave Severson We have a place just outside... 03-02-2008, 09:04 PM
stovens These guys are the salt of... 03-02-2008, 09:15 PM
stovens here is a few more train... 03-05-2008, 01:07 AM
Itoldyouso About 6 years ago my Ex GF... 03-05-2008, 03:50 AM
37 Caddy I am jealous about your... 03-16-2008, 08:29 PM
stovens Thanks 37 Caddy. The round... 03-16-2008, 08:41 PM
sgo70 I think I live with his... 03-18-2008, 11:02 PM
stovens Remarkable resemblance. We... 03-19-2008, 12:41 AM
stovens I got my American Autowire... 03-20-2008, 12:47 PM
stovens I had to pull my floor board... 03-20-2008, 06:36 PM
lamin8r Stovens,we got that about 2-3... 03-20-2008, 07:52 PM
stovens I found two solutions to the... 03-22-2008, 09:14 AM
stovens Gotta love my wife. She... 03-22-2008, 06:22 PM
Dave Severson Good progress, Steve!!!!! ... 03-22-2008, 06:27 PM
stovens Thanks Dave, this will be my... 03-22-2008, 06:39 PM
stovens So I thought I'd move on to... 03-24-2008, 02:12 PM
Itoldyouso Them 460's will make a... 03-24-2008, 03:31 PM
stovens Ok so I was watching the... 04-03-2008, 06:13 PM
Henry Rifle I have one of those engine... 03-28-2008, 10:21 AM
stovens Henry In highschool, we used... 03-28-2008, 10:27 AM
sunsetdart I got a picker from harbor... 05-04-2011, 03:33 AM
stovens Getting ready to install the... 05-16-2011, 10:01 AM
Dave Severson Should work out fine,... 04-04-2008, 04:16 PM
stovens So today was a day off and... 04-07-2008, 04:44 PM
stovens Windy nasty day today. Barely... 04-08-2008, 10:34 PM
bluestang67 Well i think when you just... 04-08-2008, 10:53 PM
stovens Well I scored big time on... 05-22-2008, 07:56 PM
NTFDAY Good scores, way to... 05-22-2008, 08:12 PM
stovens Yesterday was a good day, but... 05-30-2008, 10:01 AM
Itoldyouso We gotta have a caption... 05-30-2008, 10:16 AM
BradC How about a little tongue... 05-30-2008, 02:57 PM
stovens Pretty good Brad. I posted a... 05-30-2008, 03:11 PM
stovens I took the bed off the truck... 06-02-2008, 02:12 PM
stovens After I was done cleaning it,... 06-02-2008, 02:15 PM
stovens Here is a piece of sheet... 06-02-2008, 06:44 PM
Dave Severson That'll work to clean out the... 06-02-2008, 06:56 PM
stovens Dave when yoy say stitch... 06-02-2008, 07:12 PM
Dave Severson Well, not sure stitch is the... 06-02-2008, 07:18 PM
Itoldyouso Coming along nice Steve. ... 06-02-2008, 08:28 PM
stovens Dave that makes sense. Also... 06-03-2008, 09:01 AM
stovens I got a fair amount of frame... 06-03-2008, 03:57 PM
Dave Severson Frame is looking good, but... 06-03-2008, 05:44 PM
stovens Yeah They are lucky I don't... 06-03-2008, 06:42 PM
oldrodder43 On our '47 Ford/'89 S-10 we... 06-04-2008, 05:54 AM
stovens Yesterday was filled with... 06-08-2008, 10:37 AM
Dave Severson Well heck, if it was easy and... 06-08-2008, 04:04 PM
stovens Dave I actually went out and... 06-08-2008, 04:46 PM
stovens Sawzall is truely man's best... 06-16-2008, 05:11 PM
BradC I love how the blood fills... 06-16-2008, 05:20 PM
stovens Yep Brad, could you imagine... 06-17-2008, 10:45 AM
stovens Well I put together the gas... 06-17-2008, 05:27 PM
stovens Today, I did a bunch of... 06-30-2008, 07:20 PM
Dave Severson Now you guys know why Tom's... 06-17-2008, 05:19 PM
BradC Get back to work, hire a goat... 07-18-2008, 04:49 PM
stovens Brad it's funny you should... 07-18-2008, 05:05 PM
stovens Ok here is the grill after... 07-18-2008, 05:17 PM
Itoldyouso Ooooooooh, that lawn looks... 07-18-2008, 05:57 PM
BradC I've got 3 acres to cut, well... 07-19-2008, 05:59 PM
sgo70 Sure looks like you have a... 07-19-2008, 11:11 PM
stovens Sean my driveway has been... 07-20-2008, 10:17 AM
stovens Sanding off the old stuff one... 07-24-2008, 05:17 PM
Matt167 did you neutralize the paint... 07-24-2008, 05:26 PM
stovens Matt thats a great point I... 07-24-2008, 05:35 PM
stovens Well today involved tackling... 07-28-2008, 09:39 PM
stovens Sunday at work, it was very... 07-28-2008, 10:06 PM
tim_bo16 Stovens, its nice to see... 08-07-2008, 07:25 PM
stovens Just a mild 460, c6 tranny... 08-07-2008, 07:56 PM
tim_bo16 very cool!! i will... 08-07-2008, 08:06 PM
stovens Took a sanding break today,... 08-08-2008, 01:24 PM
Itoldyouso You are doing my least... 08-08-2008, 02:38 PM
Dave Severson Looking good Steve!!! A lot... 08-08-2008, 06:28 PM
bluestang67 Steve good head way see you... 08-08-2008, 06:46 PM
stovens I picked up my diferential... 08-12-2008, 03:56 PM
stovens Had a surprise visit today... 08-21-2008, 05:52 PM
ted dehaan I see that stove abd oven in... 09-03-2008, 10:20 AM
stovens Ken not a bad idea!:D Ted... 09-03-2008, 10:56 AM
bluestang67 See some great progress Steve... 09-03-2008, 11:15 AM
stovens It seems that way! The back... 09-03-2008, 11:20 AM
35fordcoupe that tank looks good...where... 09-06-2008, 06:05 AM
stovens The tank is from Classic... 09-06-2008, 09:07 AM
stovens Well I spent 5 hours on the... 09-08-2008, 08:12 PM
35fordcoupe do you happen to know if they... 09-09-2008, 05:00 AM
stovens Not sure but here is their... 09-09-2008, 10:26 AM
Dave Severson Looks great Steve, and I... 10-31-2008, 06:06 PM
techinspector1 I concur with reference to... 10-31-2008, 08:11 PM
Itoldyouso You gotta love them BBF... 10-31-2008, 08:30 PM
stovens Dave -I thought about going... 10-31-2008, 09:23 PM
Dave Severson [QUOTE=techinspector1]I... 10-31-2008, 10:26 PM
techinspector1 Heck yeah, I'm in. As long as... 10-31-2008, 10:42 PM
ford2custom Your doing good Steve, and... 10-31-2008, 06:23 PM
Dave Severson I'd go with the Air Gap,... 11-02-2008, 05:18 PM
bluestang67 Steve that sure looks great .... 11-02-2008, 06:08 PM
stovens A couple of quick plugs in... 11-03-2008, 10:21 PM
stovens here is a picture of what I... 11-03-2008, 10:27 PM
stovens Too funny today! Some times... 11-04-2008, 06:52 PM
Dave Severson For the smaller ones, a piece... 11-04-2008, 07:06 PM
ScooterCO Cheap backer for welding... 11-05-2008, 11:27 AM
ScooterCO Cheap backer for welding... 11-05-2008, 11:27 AM
stovens Thanks for the tip. Problem... 11-05-2008, 11:52 AM
stovens Worked on patching 40 plus... 11-14-2008, 05:41 PM
Dave Severson Should work fine, if your not... 11-14-2008, 05:44 PM
ford2custom Steve, sometimes guys will... 11-15-2008, 09:33 AM
stovens Richard - a flat head would... 11-17-2008, 05:57 PM
ford2custom Steve, you’re doing a good... 11-17-2008, 06:44 PM
stovens Thanks Richard. As my wife... 11-17-2008, 06:46 PM
Ken Thurm Steve, You are doing great!... 11-17-2008, 07:09 PM
stovens I've contiplated hammering it... 11-17-2008, 10:16 PM
ted dehaan did you see the ad in this... 12-16-2008, 09:19 PM
stovens Got out to the barn today.... 01-03-2009, 10:50 PM
Dave Severson That's a vent for the rear... 01-03-2009, 11:20 PM
stovens Why thank you Dave, now where... 01-03-2009, 11:24 PM
Dave Severson I get the filter with the... 01-03-2009, 11:32 PM
stovens Thanks! I think I'll put the... 01-03-2009, 11:34 PM
sgo70 Looks like you're making some... 01-03-2009, 11:48 PM
stovens Sean your alot farther along... 01-04-2009, 12:03 AM
Dave Severson Gauge panel looks good... 01-08-2009, 08:32 PM
stovens Thanks Dave. Camaro seems to... 01-08-2009, 08:44 PM
35fordcoupe what does the digital display... 01-09-2009, 07:00 AM
stovens THE DIGITAL DISPLAY SHOWS... 01-09-2009, 04:46 PM
stovens Went out and seal primed with... 01-13-2009, 03:19 PM
stovens Wow talk about fast. I... 01-14-2009, 10:46 AM
stovens You know I went back to... 01-14-2009, 11:53 AM
Dave Severson nice headers! You'll never... 01-14-2009, 11:10 AM
Dave Severson I used the copper ones on the... 01-14-2009, 11:57 AM
stovens Got a chance to work on the... 02-02-2009, 09:19 AM
stovens Well with the help of some F1... 02-02-2009, 02:26 PM
stovens Here is a better photo... 02-02-2009, 02:37 PM
Rickomatic Cool tool. 02-04-2009, 02:02 PM
BradC That would have saved me more... 02-05-2009, 05:53 AM
stovens Today was at last sunny! I... 02-07-2009, 04:34 PM
stovens Lokar petal went in today. It... 02-09-2009, 04:25 PM
stovens Well despite rain, I'm making... 02-14-2009, 10:47 AM
Dave Severson 10 ga. steel works quite well... 02-14-2009, 08:19 PM
stovens Dave do you cut these down... 02-14-2009, 08:32 PM
Dave Severson I use flat sheets cut down to... 02-14-2009, 10:55 PM
stovens Dave thanks. It's funny how... 02-15-2009, 11:38 AM
Dave Severson Steve, you'll for sure want... 02-15-2009, 06:07 PM
stovens You know that's not a bad... 02-16-2009, 12:54 PM
Dave Severson Finished the boxing plates... 02-16-2009, 08:13 PM
stovens Got excited today, clear... 03-09-2009, 04:19 PM
Dave Severson Kind of like getting a left... 03-12-2009, 05:03 AM
stovens That about sums it up Dave!... 03-12-2009, 10:40 AM
stovens Just back from a week off in... 03-24-2009, 07:51 PM
stovens Well I spent today to try and... 04-16-2009, 07:43 PM
ford2custom Steve, You’ve come a long... 04-19-2009, 11:56 AM
stovens Thanks Richard. I like em... 04-19-2009, 01:42 PM
sgo70 You'll be drivin' soon enough... 04-19-2009, 03:41 PM
stovens Got the new torque converter... 04-22-2009, 08:46 PM
Dave Severson The engine looks great in... 05-09-2009, 06:30 PM
stovens Thanks Dave it may not seem... 05-09-2009, 09:48 PM
Dave Severson Yup, much as we hate too,... 05-09-2009, 09:56 PM
Ken Thurm Steve, Looks good! This is... 05-10-2009, 08:06 AM
Itoldyouso Looking really good Steve. ... 05-10-2009, 08:14 AM
stovens Funny you should mention 20lb... 05-10-2009, 09:11 AM
ChrisPFlorida That is one fiiiiiine lookin'... 05-12-2009, 12:48 PM
stovens Thanks!:3dSMILE: 05-12-2009, 01:14 PM
Ken Thurm Steve, We have all done... 05-13-2009, 06:50 AM
stovens Thanks I'm going to try and... 05-13-2009, 09:35 AM
ford2custom Steve, those headaches are... 06-08-2009, 07:53 PM
stovens Thanks Richard. I hope the... 06-08-2009, 09:43 PM
sgo70 Nice job Steve, I haven't... 06-09-2009, 08:53 AM
stovens Yep. I've done more than my... 06-09-2009, 09:28 AM
ford2custom Steve, you are really getting... 06-11-2009, 06:13 PM
ford2custom I haven't changed u joints... 06-12-2009, 07:00 AM
stovens Got redirected elsewhere... 06-12-2009, 04:46 PM
Dave Severson Yuppers, getting one thing... 06-12-2009, 07:58 PM
RestoRod I have used a large(6",)... 06-12-2009, 09:05 PM
stovens with the drive line ready to... 06-15-2009, 08:42 PM
ford2custom The drive shaft is something... 06-16-2009, 03:18 AM
stovens Yeah Richard, there were a... 06-16-2009, 05:43 AM
ford2custom Steve, as I get older I just... 06-16-2009, 07:23 AM
stovens Got the gas tank plumbed in... 06-21-2009, 06:04 PM
stovens I set aside some time today... 07-04-2009, 01:55 PM
ford2custom Steve, everything is looking... 07-04-2009, 02:37 PM
stovens Thanks! The inside of the cab... 07-04-2009, 03:00 PM
ford2custom I did the rear end of a 67... 07-04-2009, 03:10 PM
stovens Got a few more small things... 07-09-2009, 08:54 PM
Dave Severson Yeah, what's the rush... 07-10-2009, 02:59 AM
stovens I hope it's comes together a... 07-10-2009, 09:06 AM
stovens Got the radiator ordered up... 07-13-2009, 08:20 PM
stovens Whittling away small stuff... 07-18-2009, 10:45 PM
bluestang67 Steve looks like it won't be... 07-19-2009, 05:09 AM
Dave Severson Should work just fine!! On... 08-30-2009, 05:57 PM
techinspector1 bulletproof, bulletproof,... 08-30-2009, 06:01 PM
stovens Got the new spacer and flex... 09-03-2009, 04:06 PM
Itoldyouso Looks great Steve. With all... 09-03-2009, 04:20 PM
Dave Severson I'd say put piece of pipe in... 11-14-2009, 05:56 PM
stovens I figured my neighbors would... 11-14-2009, 06:32 PM
stovens Got the passenger side... 11-15-2009, 08:51 PM
rspears Steve, If you take out the... 11-16-2009, 02:51 PM
Dave Severson Yeah, no what ya mean,... 11-16-2009, 07:57 AM
Dave Severson That's a couple of very nice... 12-12-2009, 06:45 AM
stovens Funny you should say that.... 12-12-2009, 10:32 AM
stovens I took out the old seat... 12-15-2009, 02:36 PM
35fordcoupe the seat looks nice. that... 12-17-2009, 07:31 AM
Dave Severson Sounds like the count down to... 12-28-2009, 05:56 PM
stovens Yep, hopefully some of the... 12-28-2009, 11:18 PM
stovens Finished wiring in battery,... 12-31-2009, 05:30 PM
Dave Severson I know what ya mean Steve,... 12-31-2009, 06:00 PM
lamin8r Hmmm,that sounds like cabin... 01-01-2010, 12:23 AM
stovens Spent most of today working... 01-01-2010, 08:09 PM
lamin8r Yeehaaa,kick er in the guts... 01-02-2010, 12:32 AM
Dave Severson The old pickup is lookin'... 05-19-2010, 06:56 AM
stovens Thanks for the tip Dave.... 05-19-2010, 06:36 PM
jrs 1143hc pistons 05-20-2010, 05:01 PM
stovens Not sure, but I would ask... 05-21-2010, 12:13 AM
Dave Severson Good solid base, Steve! ... 05-22-2010, 07:06 PM
34_40 Stovens, my uncle has a... 07-15-2010, 01:49 PM
stovens Thanks I may take you up on... 07-15-2010, 07:47 PM
stovens well after the better part of... 09-17-2010, 04:35 PM
Ken Thurm Steve, Where you are in your... 09-17-2010, 04:47 PM
Dave Severson I like getting Epoxy on a... 09-17-2010, 04:47 PM
Dave Severson Neat truck, sort of--all that... 10-02-2010, 03:43 PM
stovens Dave - Definately diferent... 10-05-2010, 06:43 PM
Itoldyouso Fun, isn't it, Steve?... 10-06-2010, 12:06 AM
stovens Thanks Don. Nice diagram. The... 10-06-2010, 09:22 AM
35fordcoupe I was thinking about this... 01-07-2011, 09:19 AM
stovens Thanks Guys. The holidays had... 01-07-2011, 11:09 AM
35fordcoupe you're in the same boat as me... 01-07-2011, 12:21 PM
406Rich Its the same here in my... 01-07-2011, 06:35 PM
Dave Severson Always a banner day the first... 04-30-2011, 03:41 PM
34_40 Yep! It's a great day when... 04-30-2011, 07:51 PM
123pugsy Just finished reading thru... 05-01-2011, 07:16 AM
Fauxre I'm sooooo jealous. ... 05-01-2011, 07:47 AM
Dave Severson Heck, just get some 20ga. and... 05-01-2011, 04:06 PM
stovens 123pugsy - I know what you... 05-02-2011, 12:34 AM
stovens Today and yesterday worked on... 05-03-2011, 09:33 PM
Dave Severson Good ideas on the mounting,... 05-16-2011, 06:05 PM
stovens Thanks for the advice guys.... 05-22-2011, 03:12 PM
stovens Wow it's been too long since... 11-13-2011, 11:04 AM
dlotraf33 Good to see you are going to... 11-13-2011, 01:46 PM
stovens Thanks for the kind words.... 11-13-2011, 02:04 PM
Whiplash23T I hear you guys on the... 11-13-2011, 02:15 PM
dlotraf33 Yeah Ain't that the... 11-13-2011, 02:22 PM
lamin8r I hear you guys..My F100 has... 11-13-2011, 11:17 PM
stovens Inspiration is always good,... 11-14-2011, 12:27 AM
stovens From other post sight "The... 12-04-2011, 09:52 AM
Fauxre Bad a$$ ride with a cool... 12-04-2011, 12:50 PM
stovens Well I finally have something... 12-04-2011, 09:50 AM
rspears That's a very cool truck, and... 12-04-2011, 12:42 PM
stovens Yeah it's rare to get three... 12-04-2011, 02:10 PM
lamin8r Its a kool... 12-04-2011, 03:35 PM
stovens Saw this on ebay for a 460... 12-13-2011, 07:13 PM
lamin8r Pretty lookin piece,isnt... 12-13-2011, 09:36 PM
stovens Yeh and he even does layaway!... 12-14-2011, 10:15 AM
stovens I went online today looking... 12-26-2011, 11:18 AM
406Rich Have you tried Bob Drake...?... 12-27-2011, 07:36 PM
406Rich The spring eye bushings slip... 12-26-2011, 04:39 PM
stovens Thanks 406rich! 12-26-2011, 05:55 PM
stovens Thanks I'll check them out. 12-27-2011, 09:06 PM
stovens Took Pat and a few other's... 01-04-2012, 02:11 PM
cffisher Less friction smoooother ride 01-04-2012, 02:51 PM
stovens First coat of black rustoleum... 01-09-2012, 03:13 PM
Dave Severson Nothing wrong with that shop,... 01-09-2012, 03:36 PM
stovens Called Eaton Springs and... 01-11-2012, 11:35 AM
stovens Dusting off the truck today.... 04-17-2012, 11:26 AM
Dave Severson Yup, time to get back on the... 04-17-2012, 01:45 PM
stovens Yep they are great with... 04-17-2012, 05:14 PM
Fauxre I also had a good experience... 04-17-2012, 05:58 PM
stovens I played with multiple sets... 04-23-2012, 10:40 AM
123pugsy No problem reusing the fluid.... 04-23-2012, 12:20 PM
stovens Thanks Pugsy. I had visions... 04-24-2012, 11:18 AM
cffisher don't know about ford trans... 04-24-2012, 11:23 AM
stovens yep it drains there too,... 04-24-2012, 11:38 AM
cffisher I have a few extra yokes just... 04-24-2012, 11:45 AM
stovens Smart thinking Charlie! 04-24-2012, 12:49 PM
123pugsy Leaving it in is the way to... 04-24-2012, 04:21 PM
firebird77clone ONCE I cut holes in a... 04-24-2012, 05:24 PM
stovens Thanks guys. Last time I also... 04-25-2012, 12:24 AM
stovens Went to the mother ship... 05-15-2012, 10:07 AM
stovens Started Operation Engine... 05-17-2012, 10:22 AM
34_40 So there's a Hooters next... 05-17-2012, 05:45 PM
stovens :D:LOL::D I was inspired by... 05-17-2012, 09:00 PM
34_40 We're still talkin' 'bout... 05-18-2012, 02:02 PM
406Rich Vintage ford runs a monthly... 05-19-2012, 07:16 AM
stovens 406Rich - that sounds like a... 05-19-2012, 08:58 AM
34_40 Well, when you get ot the... 05-19-2012, 01:53 PM
Dave Severson I'd take it in on trade for... 05-19-2012, 04:17 PM
stovens Your 71 is way to nice... 05-19-2012, 04:22 PM
406Rich Steve, here`s their calender... 05-19-2012, 05:50 PM
stovens American Draffeti Show today.... 05-19-2012, 04:30 PM
stovens Got the engine out today and... 05-24-2012, 08:35 PM
123pugsy That's the spirit. Now get... 05-25-2012, 02:38 AM
Dave Severson Blood dripped on an engine is... 05-25-2012, 04:32 PM
stovens Thanks Pugsy! I went North to... 05-25-2012, 02:06 PM
stovens If that's true Dave this is... 05-25-2012, 04:39 PM
Dave Severson Good looking grille, nice... 05-25-2012, 05:02 PM
stovens Thanks. I went to a swap meet... 05-25-2012, 07:13 PM
Dave Severson Bummer that the guy had to... 05-25-2012, 07:32 PM
stovens Yep. He seemed like a real... 05-25-2012, 09:03 PM
stovens Well had a few easy things I... 09-10-2012, 02:05 PM
oldrodder43 Sounds like your getting... 09-10-2012, 02:42 PM
stovens Thanks Perley. Just need time... 09-10-2012, 03:37 PM
stovens Working on the window channel... 09-15-2012, 10:56 AM
Fauxre Sounds like things are moving... 09-15-2012, 11:06 AM
stovens Boy it would be nice if they... 09-16-2012, 10:01 AM
stovens Some repair photos of the... 09-17-2012, 06:21 PM
stovens Got the truck into the barn,... 09-18-2012, 04:25 PM
34_40 Keep up the good work! I'm... 09-18-2012, 04:54 PM
stovens Thanks, It's just one pully... 09-18-2012, 07:27 PM
stovens Think I answered own question... 09-19-2012, 01:34 PM
34_40 So does that mean you might... 09-19-2012, 03:31 PM
stovens After looking at old photos... 09-19-2012, 01:23 PM
Dave Severson Underdriven pulleys on a BBF... 09-19-2012, 02:23 PM
stovens Thanks Dave, nice to hear... 09-19-2012, 03:45 PM
34_40 That is good news, good for... 09-19-2012, 04:26 PM
stovens Thanks, my thoughts exactly,... 09-19-2012, 04:42 PM
34_40 Roger that Steve! I'm glad I... 09-19-2012, 05:15 PM
stovens LOL :) :3dSMILE: 09-19-2012, 05:18 PM
stovens Fixed Mountain bike today... 09-20-2012, 04:20 PM
Dave Severson Where does the engine... 09-20-2012, 05:45 PM
34_40 behind the front seats! Talk... 09-20-2012, 06:09 PM
stovens Naw just hook Pretzel up, he... 09-20-2012, 07:40 PM
stovens Worked on moving the fuel... 09-21-2012, 02:37 PM
Dave Severson That ought to work! Always... 09-21-2012, 05:00 PM
stovens Well I got back from a week... 10-06-2012, 11:07 AM
34_40 Wish your Vermont trip was a... 10-06-2012, 01:48 PM
stovens Thanks. Spent the last three... 10-06-2012, 02:29 PM
stovens Right now the engine is at... 10-06-2012, 02:55 PM
stovens Well I got the mounts... 10-06-2012, 05:52 PM
34_40 That is what it takes.. one... 10-06-2012, 05:58 PM
pat mccarthy hate to say this to you but... 10-06-2012, 06:42 PM
stovens Thank s guy. Pat the leaf... 10-06-2012, 07:49 PM
rspears Steve, Not trying to jump on... 10-07-2012, 11:21 AM
406Rich I think that discussion may... 10-08-2012, 08:06 AM
stovens I hear what you and Pat are... 10-07-2012, 05:29 PM
34_40 I wonder if the OEM ran a... 10-08-2012, 01:57 PM
stovens 34-40 - I was on the ford... 10-09-2012, 11:08 AM
34_40 Like I said, just thinking... 10-09-2012, 01:47 PM
stovens LOL Yeah this truck won't... 10-10-2012, 10:55 AM
stovens Spent last week and a half... 11-04-2012, 05:33 PM
stovens Here are some pictures of the... 04-30-2013, 07:08 PM
stovens Well spring is here, rain is... 04-30-2013, 06:43 PM
Dave Severson 10 ga. is just right for... 04-30-2013, 07:06 PM
stovens Thanks Dave I think I'll... 04-30-2013, 07:36 PM
34_40 Good to hear your back on it!... 05-01-2013, 04:09 AM
406Rich I`m really jealous of this... 05-01-2013, 06:21 AM
stovens While out there I also noted... 05-01-2013, 09:20 AM
stovens Thanks. Late yesterday did a... 05-01-2013, 09:14 AM
cffisher I haven't done one of these... 05-01-2013, 11:11 AM
stovens Looks like once the pin is... 05-01-2013, 11:38 AM
34_40 Rust Bucket??? :eek: Where? ... 05-01-2013, 02:03 PM
stovens Worked a bit yesterday on the... 05-05-2013, 10:28 AM
stovens Got the front access holes... 05-09-2013, 02:38 PM
34_40 Got a machine shop close by? ... 05-09-2013, 03:01 PM
123pugsy A socket and a piece of pipe... 05-09-2013, 03:15 PM
406Rich Press out the old, press in... 05-09-2013, 03:25 PM
stovens 34_40 My thoughts exactly.... 05-09-2013, 03:35 PM
stovens Norm said to drop them off... 05-09-2013, 04:41 PM
34_40 Yes, things like a short... 05-09-2013, 07:29 PM
stovens Well got the hangers back... 05-23-2013, 04:15 PM
123pugsy I just love seeing something... 05-23-2013, 04:33 PM
stovens Thanks, figure might as well... 05-23-2013, 09:23 PM
34_40 YEP! Good stuff there Steve! 05-24-2013, 06:07 AM
stovens In my migraine stupor I... 05-28-2013, 11:44 AM
34_40 Are you certain Steve? My... 05-28-2013, 12:02 PM
stovens The shims shipped with two... 05-28-2013, 06:14 PM
rspears 58110 We Need Pictures!! 05-28-2013, 06:59 PM
cffisher Sounds like "Wall Art" I' ve... 05-28-2013, 06:47 PM
stovens Hey Roger here yah go:... 05-29-2013, 10:28 AM
rspears So what you're saying is that... 05-29-2013, 11:01 AM
cffisher you can weld up the hole and... 05-29-2013, 01:23 PM
rspears That'll work, but that's some... 05-29-2013, 02:42 PM
cffisher put a sleeve (bushing) in the... 05-29-2013, 04:31 PM
pat mccarthy send me your old shim... 05-29-2013, 06:21 PM
stovens Roger that is exactly it. New... 05-30-2013, 09:35 AM
34_40 Yep Steve, just part of the... 05-30-2013, 09:56 AM
rspears You did the right thing,... 05-30-2013, 10:00 AM
stovens Put the new leaf springs and... 06-02-2013, 04:47 PM
cffisher What is your pinion angle?... 06-02-2013, 05:31 PM
34_40 Don't measure it until the... 06-02-2013, 05:54 PM
stovens Charlie I haven't measured it... 06-02-2013, 07:07 PM
stovens Moving forward went to local... 06-10-2013, 01:00 PM
406Rich For those that want the store... 06-10-2013, 05:30 PM
stovens It's a great store, lots of... 06-11-2013, 09:09 AM
stovens Been calling Sac Vintage Ford... 07-19-2013, 05:15 PM
34_40 Waiting for parts Sucks!!! ... 07-20-2013, 03:21 AM
stovens Update. Called Sacramento... 08-20-2013, 09:39 PM
Dave Severson Good news on the plates,... 08-21-2013, 01:48 AM
34_40 Well that's good news! At... 08-21-2013, 03:20 AM
stovens Yep, just in time too. We... 08-21-2013, 10:12 AM
Fauxre Glad to hear things are... 08-21-2013, 01:22 PM
stovens Thanks Wes that will be next... 08-22-2013, 10:26 AM
stovens Spent last few weeks... 10-02-2013, 10:40 AM
34_40 Seems you really do have to... 10-02-2013, 05:41 PM
stovens just back from my Idaho Elk... 10-20-2013, 08:46 AM
stovens got some more time in on... 10-25-2013, 09:23 PM
lamin8r It can take... 10-25-2013, 10:34 PM
34_40 Same here.. been busy these... 10-26-2013, 03:30 AM
stovens Still waiting to get my... 10-26-2013, 09:29 AM
stovens Well today was more progress... 10-29-2013, 06:48 PM
34_40 Good progress Steve! Shame... 10-29-2013, 07:16 PM
stovens Yep. I also found out the... 10-29-2013, 07:58 PM
stovens More progress today, and... 11-02-2013, 06:04 PM
rspears Keep 'em dry, Steve. You... 11-03-2013, 04:37 AM
34_40 Good work Steve! I find... 11-03-2013, 01:06 AM
stovens #4_40 and Roger thanks, it's... 11-03-2013, 10:13 AM
34_40 Welding is like so many other... 11-03-2013, 02:20 PM
johnboy Totally agree! Another... 11-03-2013, 08:28 PM
stovens Thanks guys. Good tips and... 11-03-2013, 09:03 PM
parkwood Not sure this has been said... 11-13-2013, 08:50 PM
stovens Continued to work on boxing... 11-07-2013, 05:24 PM
34_40 There you go Steve! It's... 11-08-2013, 03:56 AM
Dave Severson Lookin' good Steve, slow... 11-08-2013, 06:40 AM
stovens Some more welding, shock... 11-11-2013, 06:29 PM
34_40 Don't remember now, but,... 11-11-2013, 06:54 PM
stovens :) axle! Cut the mounts... 11-11-2013, 07:59 PM
stovens Finished welding on the shock... 11-12-2013, 05:22 PM
34_40 Perty!!! 8-) What's... 11-13-2013, 12:44 PM
Fauxre Ahhh...the smell of fresh... 11-13-2013, 06:21 PM
stovens Now time to reinstall the... 11-14-2013, 12:55 AM
jerry clayton have you considered just... 11-14-2013, 06:35 AM
stovens Jerry I actually had a dream... 11-14-2013, 09:48 AM
jerry clayton wix/fram???????? 11-14-2013, 10:04 AM
NTFDAY I'm not Jerry, but I would... 11-14-2013, 10:37 AM
34_40 What they said... WIX! 8-) 11-14-2013, 01:45 PM
stovens After welding, with shocks... 11-15-2013, 05:15 PM
stovens I'm thinking like a ladder... 11-17-2013, 04:29 PM
stovens Thanks for the tips on... 11-15-2013, 05:13 PM
stovens Got a little more time in on... 11-17-2013, 04:27 PM
34_40 I would! Do you have the... 11-17-2013, 06:45 PM
stovens No material yet, but local... 11-17-2013, 07:36 PM
34_40 That sounds like a good place... 11-18-2013, 01:22 PM
stovens Got the gas tank remounted... 11-22-2013, 04:26 PM
stovens Big progress today got the... 12-09-2013, 03:11 PM
34_40 Looking Good Steve! Hey, how... 12-09-2013, 03:39 PM
Dave Severson Getting close, Steve! Truck... 12-09-2013, 03:54 PM
falconvan Looking great, Steve! 12-10-2013, 05:03 AM
stovens Well got the transmission... 12-20-2013, 05:10 PM
stovens With transmission bolted in,... 12-23-2013, 04:56 PM
34_40 Good Progress Steve! Thanks... 12-23-2013, 05:57 PM
stovens Well after two full days... 12-29-2013, 09:15 PM
34_40 That's good progress Steve!... 12-30-2013, 01:07 AM
rspears First fire is an exciting... 12-30-2013, 06:30 AM
stovens 34-40 and Roger thanks, and... 12-30-2013, 09:44 AM
stovens Here is a startup video, had... 12-31-2013, 05:36 PM
Dave Severson Congrats Steve, good to hear... 01-01-2014, 09:50 AM
stovens I think next is the floor... 01-01-2014, 08:13 PM
stovens The next question is what are... 01-06-2014, 05:44 PM
stovens Here is a shot of the... 01-06-2014, 05:47 PM
stovens Managed to fix my carb... 01-01-2014, 08:09 PM
stovens Today I cut the tunnel that... 01-06-2014, 05:40 PM
34_40 Thanks for all the pics... 01-06-2014, 06:40 PM
stovens The wierd thing about the... 01-07-2014, 10:30 AM
rspears No explanation, but see the... 01-07-2014, 11:42 AM
stovens Thanks Roger. Still no idea... 01-07-2014, 01:23 PM
stovens Well I got this answer on a... 01-07-2014, 01:27 PM
rspears Steve, if you do a little... 01-07-2014, 01:45 PM
stovens Wow that's a bit intensive,... 01-07-2014, 04:32 PM
34_40 If you know where neutral is,... 01-07-2014, 06:13 PM
stovens I was just joking about the... 01-07-2014, 08:49 PM
34_40 I was thinking later that you... 01-08-2014, 03:02 AM
stovens I had the day off today, and... 01-17-2014, 03:56 PM
falconvan Great work, Steve! That... 01-25-2014, 03:50 PM
roadster32 This is strange Steve 51... 01-26-2014, 03:35 AM
stovens Yeah it's been a learning... 01-26-2014, 10:00 AM
Whiplash23T Steve you have done darn well... 01-26-2014, 01:23 PM
stovens Thanks Whip. I just got... 01-26-2014, 03:42 PM
rspears A piece of 1X2, 2X4 or... 01-26-2014, 03:49 PM
stovens That's for sure Roger, it's... 01-26-2014, 04:12 PM
rspears With your wife you'll get... 01-26-2014, 04:40 PM
stovens LOL yep that would be the... 01-26-2014, 05:13 PM
NTFDAY If it's a dual element bulb... 01-27-2014, 06:32 AM
stovens Turn signal works off a third... 01-27-2014, 10:28 AM
stovens I finally got a chance to get... 02-22-2014, 05:36 PM
stovens Well had a little time on the... 02-03-2014, 03:24 PM
34_40 On my uncles 48 F-1 I... 02-03-2014, 04:08 PM
stovens Thanks 34_40! I am running an... 02-03-2014, 05:55 PM
34_40 As I said. We went electric... 02-03-2014, 07:33 PM
stovens Been saving my pennies for an... 03-31-2014, 01:51 PM
40FordDeluxe Very nice! It sounds like you... 04-01-2014, 06:06 PM
stovens So I had some time to scout... 04-06-2014, 03:09 PM
34_40 That'll work nice Steve, with... 04-06-2014, 03:25 PM
rspears Steve, Nothing wrong with... 04-06-2014, 04:10 PM
firebird77clone The steel strips will have... 04-06-2014, 05:52 PM
stovens I think he wanted to see how... 04-07-2014, 10:30 AM
stovens Worked some more on the truck... 04-12-2014, 05:48 PM
stovens Sorry for no recent updates,... 05-10-2014, 07:10 PM
40FordDeluxe Nice work on removing your... 05-12-2014, 01:06 PM
stovens Did a bunch of stuff today... 05-27-2014, 08:04 PM
34_40 Good progress There Steve! ... 05-28-2014, 05:18 AM
rspears Good to see you're making... 05-28-2014, 06:12 AM
stovens I'm all about saving money, I... 05-28-2014, 08:58 AM
rspears Steve, the issue with bolt... 05-28-2014, 11:05 AM
Henry Rifle Roger, your first phrase is... 05-28-2014, 01:55 PM
stovens Yep that is my concern.... 05-29-2014, 12:39 AM
stovens Got some more time in on the... 05-31-2014, 07:23 PM
rspears I'd say you need to route... 05-31-2014, 07:58 PM
firebird77clone I'd not have thought of... 06-01-2014, 04:09 AM
stovens I've never actually seen the... 06-01-2014, 12:07 PM
stovens Went down to our local steel... 06-05-2014, 04:04 PM
34_40 Looks good Stoven! Will you... 06-05-2014, 04:26 PM
stovens Most definately! Thanks. Like... 06-05-2014, 04:56 PM
rspears What type of "steel"? Is it... 06-05-2014, 05:12 PM
stovens Yep it's just regular steel,... 06-05-2014, 05:15 PM
34_40 I did the angle at the front... 06-06-2014, 12:35 PM
stovens Might blue it or use paint... 06-06-2014, 03:36 PM
stovens Worked some more on the truck... 06-10-2014, 04:29 PM
stovens I was able to run down to our... 06-10-2014, 06:31 PM
stovens Got some more 1"x1" square... 06-20-2014, 05:53 PM
stovens Made my sub-frame out of 1"... 06-23-2014, 05:53 PM
34_40 WOW, that look nice Steve! I... 06-24-2014, 03:35 PM
stovens Thanks 34-40! I'm pretty... 06-24-2014, 06:19 PM
40FordDeluxe That looks great, nice work! 06-25-2014, 04:09 PM
stovens The finish was a semi gloss... 06-26-2014, 10:39 AM
34_40 I think it's wonderful just... 06-26-2014, 03:49 PM
stovens Here is a funny thing I... 06-29-2014, 05:13 PM
stovens Well had everything lined up... 07-08-2014, 04:27 PM
40FordDeluxe You're getting closer! 07-09-2014, 03:58 PM
stovens Even closer after this... 07-10-2014, 12:45 AM
Dave Severson Progress is good!!! What's... 07-10-2014, 01:41 AM
stovens While the truck is away it... 07-10-2014, 09:55 AM
Fauxre Holy cow!!!! I gotta check... 07-10-2014, 10:19 AM
stovens Thanks Wes 07-10-2014, 11:34 AM
40FordDeluxe That's good to hear it's on... 07-10-2014, 12:45 PM
stovens Thanks, the knee actually... 07-11-2014, 10:57 AM
stovens Since I can't work on... 07-26-2014, 10:37 AM
stovens Well post op day three with a... 07-26-2014, 10:28 AM
40FordDeluxe Hopefully your knee heals... 07-28-2014, 11:58 AM
stovens Finally an update! Talked... 09-15-2014, 09:29 PM
rspears Sounds good, Steve, and know... 09-16-2014, 05:27 AM
stovens Roger, his shop rates are... 09-16-2014, 10:46 AM
40FordDeluxe Steve, glad to hear you're... 09-16-2014, 07:03 AM
stovens Ryan thanks yep looking... 09-16-2014, 10:48 AM
stovens More progress. New carburetor... 10-01-2014, 11:11 AM
40FordDeluxe Progress is good! Hopefully... 10-01-2014, 11:40 AM
34_40 Whenever I have a lot of... 10-01-2014, 01:58 PM
stovens I think once he's done, other... 10-02-2014, 09:30 AM
stovens I think I have to get it back... 10-02-2014, 09:21 AM
stovens Got a catalog email from LMC... 01-24-2015, 09:51 AM
stovens They also had these new tail... 01-24-2015, 10:07 AM
rspears LMC Truck (Long Motor... 01-24-2015, 03:06 PM
stovens Very cool Roger I talked... 02-03-2015, 02:29 PM
34_40 That's good news Steve. Be... 02-03-2015, 05:21 PM
40FordDeluxe Nice to hear you're making... 02-03-2015, 05:44 PM
stovens Yep. and Yes. I hope the... 02-04-2015, 09:39 AM
stovens Still waiting, but may have... 04-05-2015, 09:42 AM
stovens Wow it has been a long time... 07-13-2015, 10:08 AM
NTFDAY Sorry to hear that, seems to... 07-13-2015, 11:05 AM
stovens No children thank goodness!.... 07-13-2015, 12:15 PM
40FordDeluxe Steve, I'm sorry to hear... 07-13-2015, 10:44 PM
34_40 Times 3 Steve.. Don't dwell... 07-14-2015, 05:58 PM
stovens Thanks guys things are... 07-14-2015, 08:33 PM
36 sedan Hang in there my friend,... 07-14-2015, 09:09 PM
stovens No update on truck trying to... 09-07-2015, 09:42 AM
36 sedan I'm rooting for you.... 09-07-2015, 10:17 AM
stovens I stand corrected. She gave... 09-07-2015, 12:00 PM
Whiplash23T So sorry to read about your... 09-07-2015, 03:59 PM
40FordDeluxe Good luck with it all Steve!... 09-08-2015, 11:56 AM
rspears Been there, done that, and... 09-08-2015, 03:58 PM
stovens Right now Randy is doing me a... 09-09-2015, 12:33 AM
rspears Yeah, I can see that being... 09-09-2015, 07:53 AM
rspears Steve, I understand that... 11-03-2015, 09:43 AM
jerry clayton Yep-Dot 5-doesn't mix with... 11-03-2015, 10:59 AM
stovens Yep all parts tubing... 11-03-2015, 11:01 AM
stovens well new update on the house... 11-30-2015, 08:12 PM
rspears Good news on the move, Steve,... 11-30-2015, 08:21 PM
Bob Parmenter There's an ol' addage about... 12-01-2015, 06:20 AM
stovens Thanks guys. First real... 12-02-2015, 01:02 AM
40FordDeluxe Hang in there and good luck... 12-03-2015, 02:50 PM
stovens Getting better every day! 12-03-2015, 03:11 PM
stovens Well I'm settled in the new... 12-09-2015, 11:04 AM
40FordDeluxe I'm glad to hear you're... 12-09-2015, 01:16 PM
34_40 Times 2. It's good to hear... 12-09-2015, 05:05 PM
stovens Thanks Guys. It is nice to... 12-10-2015, 01:12 AM
stovens Well it's been since July... 09-20-2016, 10:22 AM
40FordDeluxe Congrats on getting it home! 09-20-2016, 11:37 AM
34_40 Times 2! So glad for you to... 09-20-2016, 01:01 PM
stovens Thanks guys. I spent a hour... 09-21-2016, 12:38 AM
Whiplash23T Hell, I had typed out a reply... 09-21-2016, 07:33 PM
stovens Whiplash glad to see your... 09-21-2016, 09:29 PM
johnboy It's good to see that the... 09-21-2016, 09:44 PM
Whiplash23T Johnboy stole my words that... 09-22-2016, 03:06 PM
stovens Got aq few minor things fixed... 10-10-2016, 05:42 PM
34_40 Good for you Steve. PROGRESS!... 10-10-2016, 06:58 PM
Whiplash23T Yeah, good on you and your... 10-11-2016, 03:13 AM
rspears Steve, your post made me... 10-11-2016, 05:34 AM
stovens Thanks guys. It's funny,... 10-11-2016, 10:23 AM
40FordDeluxe I bit my self a couple years... 10-11-2016, 12:22 PM
Fauxre Half the time I can't... 10-14-2016, 07:43 PM
firebird77clone Memory is visual. I have... 10-14-2016, 10:11 PM
stovens Driving to work yesterday saw... 10-15-2016, 11:25 AM
stovens Could have been a 440 super... 10-15-2016, 11:56 AM
rspears Front end more like this? ... 10-15-2016, 02:07 PM
stovens Hey Roger, thanks for chiming... 10-15-2016, 02:27 PM
stovens here is the closest picture I... 10-15-2016, 02:29 PM
rspears That split front was unique... 10-15-2016, 04:02 PM
stovens Pretty cool car. I imagine... 10-16-2016, 10:20 AM
stovens Funny this thread has been a... 01-24-2017, 12:37 PM
stovens Thanks, Ever since the... 07-03-2017, 09:20 AM
stovens I thought about buying back... 07-01-2018, 03:49 PM
Whiplash23T Now Stephen, what are you... 01-24-2017, 04:45 PM
53 Chevy5 If i am not mistaken, primer... 01-24-2017, 06:36 PM
Matthyj Epoxy primer does. 01-24-2017, 06:59 PM
firebird77clone Ditto. Epoxy. 01-24-2017, 09:30 PM
53 Chevy5 I didn't know that. All the... 01-25-2017, 07:13 PM
40FordDeluxe You could paint it with a... 01-25-2017, 08:28 PM
stovens Thanks guys I was just... 01-26-2017, 06:58 PM
40FordDeluxe I was going to paint mine... 01-26-2017, 07:56 PM
stovens hey folks just under a year... 07-01-2018, 03:41 PM
34_40 Quite the story, so glad... 07-01-2018, 04:30 PM
Hotrod46 Good thing you had the video... 07-01-2018, 07:52 PM
stovens Thanks guys. I am grateful... 07-01-2018, 10:50 PM
Hotrod46 Your type of accident is the... 07-02-2018, 03:52 AM
stovens A doctor friend mentioned the... 07-02-2018, 09:55 AM
firebird77clone At 6'0" I find very few head... 07-02-2018, 05:23 PM
40FordDeluxe The 05 Dodge ram seats I have... 07-03-2018, 06:59 PM
stovens I'm also 6 feet. 07-02-2018, 05:32 PM
40FordDeluxe I'm so glad you weren't hurt... 07-03-2018, 06:56 PM
stovens UPDATE After almost 2.5... 10-13-2018, 09:41 AM
34_40 That is great news Steve!... 10-13-2018, 04:39 PM
stovens It will also be nice to get... 10-13-2018, 10:19 PM
stovens Yep. the truck has always... 10-13-2018, 10:17 PM
34_40 We all have to live within a... 10-14-2018, 04:45 AM
40FordDeluxe I'm sure you are excited to... 10-15-2018, 02:11 PM
firebird77clone It .right be time to... 10-15-2018, 04:37 PM
stovens Yup Once the parts start... 10-16-2018, 09:22 AM
stovens Finally something to update... 11-06-2018, 04:39 PM
34_40 Shame the "exhaust guys"... 11-07-2018, 06:19 AM
stovens there was already a notch by... 11-07-2018, 10:06 AM
Driver50x Yep, keeping track of all... 11-07-2018, 11:57 AM
40FordDeluxe I'm sure it feels good to... 11-07-2018, 01:12 PM
stovens High temp which they have... 11-08-2018, 12:36 PM
stovens Quick up date after... 11-24-2018, 11:12 AM
34_40 If you only need a CH... um..... 11-24-2018, 01:42 PM
stovens :confused:Well once again... 09-11-2019, 09:26 AM
40FordDeluxe Good to hear you're back at... 09-11-2019, 11:44 AM
34_40 Ditto, What He said. Good to... 09-11-2019, 05:23 PM
rspears Steve, doesn't time fly when... 03-25-2021, 08:13 AM
stovens I agree, and it will motivate... 03-25-2021, 09:04 AM
stovens OK now that its decided to... 03-27-2021, 04:04 PM
rspears I'm not sure what would break... 03-27-2021, 04:26 PM
36 sedan With modern fuels, 4-6 weeks... 03-27-2021, 05:53 PM
stovens Thanks for the tips. I went... 03-28-2021, 12:30 PM
36 sedan Vacuum leak makes it lean,... 03-28-2021, 01:25 PM
rspears Ever heard an Old Timer talk... 03-28-2021, 03:11 PM
36 sedan Old days HE--! I still do... 03-28-2021, 04:10 PM
NTFDAY As far as I'm concerned this... 03-28-2021, 05:18 PM
stovens Not sure what the original... 03-29-2021, 10:48 AM
NTFDAY All eddys are nothing more... 03-29-2021, 11:21 AM
36 sedan IMHO, there is nothing wrong... 03-29-2021, 12:41 PM
NTFDAY We'll agree to disagree.... 03-29-2021, 03:02 PM
36 sedan Ken, I agree and I’m not... 03-29-2021, 05:49 PM
34_40 true enough. both designs... 03-29-2021, 06:32 PM
rspears Like Ken I grew up with... 03-29-2021, 07:58 PM
johnboy I hear you on that. I've... 03-29-2021, 09:01 PM
stovens Update. I'm pretty sure the... 04-03-2021, 09:37 AM
stovens It comes today so on next day... 04-03-2021, 09:40 AM
NTFDAY That's a really nice pump,... 04-03-2021, 09:45 AM
stovens They also sell on amazon for... 04-04-2021, 10:40 AM
stovens I'm guessing it will hold up... 04-04-2021, 10:35 AM
rspears Sta-Bil has an Ethanol... 04-04-2021, 07:41 PM
stovens Roger I haven't had much luck... 04-05-2021, 11:25 AM
rspears Looks like it should be good!... 04-05-2021, 11:36 AM
stovens Thats our main problem here,... 04-05-2021, 12:38 PM
rspears Yeah, Cali gas tax sucks! No... 04-05-2021, 02:49 PM
stovens Yes it does and usually when... 04-05-2021, 06:30 PM
rspears I think if you let it idle... 04-06-2021, 05:03 AM
stovens :cool:Yes! 04-06-2021, 10:31 AM
stovens Update. New fuel pump fixed... 04-07-2021, 09:30 AM
stovens Once again a long time from... 12-18-2021, 11:47 AM
rspears Your investing the time,... 12-18-2021, 02:12 PM
stovens Next I started to get fenders... 03-23-2022, 09:27 AM
stovens Next continue emptying garage... 03-23-2022, 09:32 AM
stovens Now for the last three... 03-23-2022, 09:35 AM
stovens Day 2 root removal and... 03-23-2022, 09:42 AM
stovens And now for this morning.... 03-23-2022, 09:51 AM
stovens Now for truck updates managed... 03-23-2022, 09:59 AM
stovens O.K. I've been busy working... 03-23-2022, 09:25 AM
rspears You're smart to have them... 03-23-2022, 12:22 PM
34_40 I think I clicked on every... 03-23-2022, 05:37 PM
Bob Parmenter I'd call that... 03-24-2022, 04:34 AM
stovens They are also adding black... 03-24-2022, 07:32 AM
stovens After a few days drying time... 04-03-2022, 09:23 AM
stovens Here are some better photos... 04-03-2022, 10:08 AM
stovens Updates on garage. Here was... 04-03-2022, 09:08 AM
stovens I have had a blog sort of... 05-08-2022, 10:58 AM
40FordDeluxe Wow, that new flor is so much... 05-12-2022, 05:59 AM
stovens Great article that goes into... 05-12-2022, 10:25 AM
stovens Thanks Ryan. Wednesday has a... 05-12-2022, 12:00 PM
stovens Yes insulation, wiring and... 05-12-2022, 09:50 AM
stovens I finished the garage as far... 05-22-2022, 10:10 AM
rspears Congrats on the new space!... 05-22-2022, 10:25 AM
stovens Thamks Roger it has been a... 05-22-2022, 07:28 PM
40FordDeluxe That is much nicer and the... 06-03-2022, 06:58 AM
stovens Thanks Ryan. I have... 06-03-2022, 10:10 AM
stovens Well I turned 59 on... 06-17-2022, 07:06 PM
34_40 Ya know.. too much... 06-18-2022, 02:38 PM
40FordDeluxe Your garage is looking very... 06-22-2022, 02:54 AM
stovens Thanks Ryan! I'm trying to... 06-22-2022, 09:22 AM
34_40 That's interesting Steve... I... 06-23-2022, 03:17 AM
stovens think that the carb needs a... 06-23-2022, 09:55 AM
34_40 My only other thought is... 06-23-2022, 02:05 PM
stovens Thanks actually the last... 06-24-2022, 10:53 AM
34_40 I think I'd like to try 2... 06-24-2022, 02:13 PM
stovens I'm right there with you.... 06-24-2022, 03:37 PM
stovens Well upon taking carb top... 06-24-2022, 05:47 PM
34_40 I'm so glad you found the... 06-26-2022, 03:06 AM
stovens Thanks Ordered to cheap 5... 06-26-2022, 09:27 AM
34_40 Shame about the workload.... 06-27-2022, 05:51 AM
stovens Sorry to hear about the... 06-27-2022, 10:39 AM
stovens Carb photos ... 06-27-2022, 11:34 AM
NTFDAY Your carb is clean compared... 06-28-2022, 08:10 AM
stovens Just read up on this stuff.... 06-27-2022, 11:56 AM
34_40 this will be interesting to... 06-27-2022, 05:35 PM
stovens Yes. I drove 30 miles thru... 06-27-2022, 06:15 PM
34_40 Well.. I must say that... 06-28-2022, 06:03 AM
stovens Well mission successful.... 06-29-2022, 12:27 PM
34_40 Well that is great news! ... 06-29-2022, 06:52 PM
stovens Sleep! Just kidding, 15 yards... 06-30-2022, 10:17 AM
rspears That mulch should be all... 08-13-2022, 11:16 AM
stovens Hey there. Truck in good,... 08-13-2022, 11:55 AM
rspears Sometimes life gets in the... 08-13-2022, 01:41 PM
shine those glass filters break.... 08-13-2022, 01:50 PM
rspears I'm not arguing about the... 08-13-2022, 03:38 PM
stovens Roger, one of my retired... 08-14-2022, 08:40 AM
stovens I feel the same about them... 08-14-2022, 08:31 AM
rspears Yeah, it can be like that,... 08-15-2022, 02:30 PM
34_40 I've used that same filter on... 08-16-2022, 05:32 AM
shine over the years i have done 2... 08-16-2022, 07:31 AM
NTFDAY The only glass filter I ever... 08-16-2022, 07:58 AM
stovens I had a gas one on my Harley... 08-16-2022, 10:23 AM
stovens Well got some truck time this... 03-26-2023, 05:01 PM
34_40 Sometimes any progress is... 03-27-2023, 12:27 PM
40FordDeluxe Little by little just don't... 03-28-2023, 09:25 AM
stovens I'll post a few shots of the... 03-28-2023, 09:32 AM
stovens This was seeing what 4 of the... 04-09-2023, 03:03 PM
stovens Trying to figure out what... 04-09-2023, 03:10 PM
stovens Played around with trying to... 04-09-2023, 02:49 PM
Dave Severson The taller rears would... 04-09-2023, 04:00 PM
34_40 I ended up running all the... 04-10-2023, 02:13 PM
53 Chevy5 I think you would get by with... 04-10-2023, 08:06 PM
stovens Thanks for input! this week I... 04-23-2023, 12:07 PM
Mike P Catching up on my reading... 04-24-2023, 03:19 AM
Dave Severson With my trusty "stagger tape"... 04-24-2023, 07:35 AM
stovens Mike P. I'll look into a bump... 06-15-2023, 10:04 AM
rspears There goes the project!!... 06-15-2023, 04:25 PM
34_40 Yes, another case of... 06-16-2023, 03:34 AM
stovens Well 60 years old today and... 06-15-2023, 09:55 AM
Mike P ".... Well 60 years old today... 06-15-2023, 11:13 AM
stovens Thanks Mike , it is good! 06-15-2023, 11:37 AM
40FordDeluxe Happy birthday Stovens!... 06-16-2023, 02:38 AM
stovens Thanks Ryan 06-16-2023, 10:25 AM
stovens Well I may be silent these... 07-30-2023, 04:10 PM
rspears Hard to say without knowing... 07-31-2023, 06:09 AM
stovens Thanks Roger. This engine... 07-31-2023, 08:38 AM
stovens Well I just chatted with my... 07-31-2023, 09:14 AM
rspears I don't recall what engine... 07-31-2023, 10:11 AM
stovens Roger it's a 1971 460. I... 08-01-2023, 10:29 AM
Mike P ".......Well I just chatted... 08-01-2023, 12:44 PM
stovens I actualy gort a day off work... 08-02-2023, 09:43 AM
rspears Steve, I believe you're going... 08-02-2023, 11:25 AM
34_40 I was thinking like Roger.... 08-02-2023, 05:13 PM
stovens Thanks guys, that is really a... 08-03-2023, 10:12 AM
34_40 This will stir the pot but. ... 08-03-2023, 04:27 PM
stovens Great news, and thanks for... 08-04-2023, 12:47 PM
rspears Glad to hear the result!!... 08-04-2023, 01:17 PM
stovens Yep, my truck seems to give... 08-04-2023, 02:46 PM
40FordDeluxe I'm glad you got that figured... 08-05-2023, 02:26 AM
Mike P Yeah I had a gasket stick to... 08-05-2023, 07:14 AM
stovens Yeah this one lasted over a... 08-05-2023, 09:02 AM
40FordDeluxe It wouldn't had made it 2... 08-08-2023, 04:42 AM
stovens Time for an overdue Update.... 10-29-2023, 12:45 PM
rspears Baby steps are forward... 10-29-2023, 04:51 PM
34_40 Looks like Xmas in there! ... 10-29-2023, 05:20 PM
stovens I sold off most of the rusty... 10-29-2023, 08:59 PM
  1. #1
    sgo70's Avatar
    sgo70 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Nov 2007
    Location
    Calgary
    Posts
    496

    I think I live with his brother . What a guy has to do to go for a walk in -30C.

    Sean
    Attached Images

  2. #2
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,793

    Remarkable resemblance. We saved this guy from the animal shelter a year ago in January. He's like my right hand, always there to follow me. Nothing more than a simple walk to make his day! Your dog looks like a good companion too. Here is a more playfull photo
    " "No matter where you go, there you are!" Steve.

  3. #3
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,793

    I got my American Autowire kit in the mail today. This is the bomb as my wife likes to say. Very well laid out, with wiring by systems packages, A=engine starting and running, includes new keyed GM style ignition switch, B= charging systems, C=Head lights and comes with dash light switch, and floor push button dimmer switch, D= turns signals, etc... So you only add what you need, connecting to their fuse box as you go, no dangling wire mess!
    Also comes with 175 amp master fusable link, which you can remove, that works great as an anti theft deterant(when removed)!
    I'm very happy with it. So just have to finish bleeding brakes, then start wiring, which is exciting, because once it is wired, I can start putting all of the aluminum performance parts on it to lighten the load, and increase the performance. I think, come this summer, I'll pull the engine and work on cleaning up the engine bay, having the rewelding of the motor mounts done, to the correct engine angle, and continue the rust removal process for the body. This fall I hope to have the financial reserves to purchase a good welder, and start doing little metal repair projects. But I am still on track to get it road worthy for Petaluma Salute to American Graffeti Days in May. I won't drive it more than a mile that day. But by next year, should be able to uase it when ever, where ever( all driven by finances to get things, and make it safe!)
    Last edited by stovens; 03-20-2008 at 12:49 PM.
    " "No matter where you go, there you are!" Steve.

  4. #4
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,793

    I had to pull my floor board on the drivers side to work on the brake linkage today. It turns out, my conversion kit came with too long of a linkage, so tomorrow, I'll get a shorter threaded rod or cut the one that came with the kit. I read this as a email today and thought the dog and cat lovers would like this as well as anyone with a soft heart in life. This is a salute to my last dog Sierra who we put to sleep a year ago when she delveloped brain cancer.
    A Dog's Purpose (from a 6-year-old).

    Being a veterinarian, I had been called to examine a ten-year-old
    Irish Wolfhound named Belker. The dog's owners, Ron, his wife, Lisa,
    And their little boy, Shane, were all very attached to Belker, and
    They were hoping for a miracle.

    I examined Belker and found he was dying of cancer. I told the family
    We couldn't do anything for Belker, and offered to perform the
    Euthanasia procedure for the old dog in their home.

    As we made arrangements, Ron and Lisa told me they thought it would
    Be good for six-year-old Shane to observe the procedure. They felt as
    Though Shane might learn something from the experience.

    The next day, I felt the familiar catch in my throat as Belker's
    Family surrounded him Shane seemed so calm, petting the old dog for
    The last time, that I wondered i f he understood what was going on.

    Within a few minutes, Belker slipped peacefully away.

    The little boy seemed to accept Belker's transition without any
    Difficulty or
    confusion. We sat together for a while after Belker's
    Death, wondering aloud about the sad fact that animal lives are
    Shorter than human lives. Shane, who had been listening quietly,
    Piped up, 'I know why.'

    Startled, we all turned to him. What came out of his mouth next
    Stunned me. I'd never heard a more comforting explanation.

    He said, 'People are born so that they can learn how to live a good
    Life -- like loving everybody all the time and being nice, right?'
    The Six-year-old continued, 'Well, dogs already know how to do that,
    So they don't have to stay as long.'

    So Remember:

    Live simply.

    Love generously.

    Care deeply.

    Speak kindly.

    Remember, if a dog was the teacher you would learn things like:

    When loved ones come home, always run to greet them.

    Never pass up the opportunity to go for a joyride.

    Take naps.

    Stretch before rising.

    Run, romp, and play
    daily.

    Thrive on attention and let people touch you.

    Avoid biting when a simple growl will do.

    On warm days, stop to lie on your back on the grass.

    On hot days, drink lots of water and lie under a shady tree.

    When you're happy, dance around and wag your entire body.

    Delight in the simple joy of a long walk

    Be loyal.

    Never pretend to be something you're not.

    If what you want lies buried, dig until you find it.

    When someone is having a bad day, be silent, sit close by and nuzzle
    Them gently.
    " "No matter where you go, there you are!" Steve.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink