Thread: Ford 9 inch question
-
05-21-2008 12:49 PM #1
Ford 9 inch question
Short of removing an axle, is there any way to find out what spline axle i have? the tag is still on the assy. if thats any help.
i'm looking to get a taller ratio and not have a limited slip as this is for a dailey driver, no racing or off roading.
thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-21-2008 12:53 PM #2
other than getting sweaty and a bit greasy, its only a 30 min job.that way you will know for sure. more than likely its a 28 spline. what did it come out of?
-
05-21-2008 01:03 PM #3
the tag on the pumpkin says on the top line: WFF-B 1EC
bottom line : 3L50 9. 3 361A
from what i can gather it's a 3:50 ratio with limited slip, i'm not sure how to
decode what year and what it came out of.
-
05-21-2008 02:38 PM #4
Kevinstang's Ford Nine Inch Differential Page +
Might help out a bit....note the part about the hub end of the axle. 28 spline have a rectangle shape in them. 31 spline a small hole in the center with 2 outer holes on each side. That should tell you spline count.Last edited by FFR428; 05-21-2008 at 02:40 PM.
-
05-21-2008 07:35 PM #5
Cant seem to find a 9 with a WFF , must be alot newer then anyone has documented yet .
WDM-AH 3.25:1 9
WCZ-S 3.50:1 9 WCZ-T 3.50:1 9
WDC-DW 2.75:1 9 WDC-EB 2.75:1 9
WDC-EE 3.00:1 9 WDC-EH 2.75:1 9
WDC-EK 3.00:1 9 WDC-EL 2.50:1 9
WDC-EM 2.50:1 9 WDX-E 2.75:1 9
WCZ-H 3.89:1 9 WCZ-J 4.11:1 9
WCZ-P 3.50:1 9 WCZ-R 3.89:1 9
WFU-E 4.30:1 9 WEB-BF 2.50:1 9
WEB-BK 3.00:1 9 WEB-BM 2.75:1 9
WES-F 3.00:1 9 WES-G 3.25:1 9
WES-H 3.50:1 9 WES-J 3.89:1 9
WES-K 3.50:1 9 WES-M 3.25:1 9
WES-N 3.00:1 9 WES-P 3.25:1 9
WES-R 3.25:1 9 WES-T 2.75:1 9
WES-T1 2.75:1 9 WES-U 3.50:1 9
WES-V 3.00:1 9 WES-Y 3.50:1 9
WES-Z 3.00:1 9 WES-AA 3.00:1 9
WES-AB 3.25:1 9 WES-AC 3.00:1 9
WES-AD 3.25:1 9 WES-AE 3.50:1 9
WES-AG 2.75:1 9 WES-AH 3.00:1 9
WES-AJ 3.25:1 9 WFA-AA 3.00:1 9
WFA-AH 3.00:1 9 WFA-AL 2.75:1 9
WFB-A 3.25:1 9 WFB-C 3.25:1 9
WFB-D 3.00:1 9 WFB-G 2.50:1 9
WFB-K 2.50:1 9 WFD-A 3.50:1 9
WFD-B 3.91:1 9 WFD-C 4.30:1 9
WFD-D 3.91:1 9 WFD-E 4.30:1 9
WFD-F 3.50:1 9 WFD-J 3.25:1 9
WFD-K 3.00:1 9 WFD-L 3.00:1 9
WFD-M 3.25:1 9 WFG-AL 3.00:1 9
WFG-AA 2.75:1 9 WFG-BJ 2.75:1 9
WFV-T 2.75:1 9 WFY-A 2.75:1 9
WFY-K 3.00:1 9 WGB-V 2.75:1 9
WGB-W 3.00:1 9 WGB-AB 2.50:1 9
WGB-AD 2.75:1 9 WGC-A 2.75:1 9
WGC-K 2.50:1 9 WGC-N 2.75:1 9Last edited by bluestang67; 05-21-2008 at 07:43 PM.
-
05-21-2008 07:53 PM #6
a little more info if it helps
-
05-21-2008 08:16 PM #7
From what I under stand all the 4X4 fords are supposed to be 31 spline. Kurt
-
05-22-2008 07:19 AM #8
Thanks Guys,
It has a small hole in the center of the axle head and two large ones on the outer edge.
-
05-22-2008 09:30 AM #9
Originally Posted by vara4
Mark
-
05-22-2008 01:14 PM #10
Originally Posted by chopnchanneled
Sounds like 31 spline then.
-
05-23-2008 04:57 AM #11
Originally Posted by Mark in Memphis1949 Ford F1 stocker, V8 flatty
1950 Ford F1 pu street rod
1948 Ford F3 pu projec
1948 Ford 2.5 ton dually project
1953 Chevy 3100 AD project to my 85 S10pu
1968 2.2 Ecotec Baja Bug kingCoil etc.
1998.5 Dodge diesel 4x4 many extras
Ok gang. It's been awhile. With everything that was going on taking care of my mom's affairs and making a few needed mods to the Healey, it was June before anything really got rolling on this...
My Little Red Muscle Truck