Thread: Wiring question

Tweet

Thanks Dave
The "Billet wire pass through" is sort of what I am looking for. However I need something less brilliant than the shinny aluminum. My firewall is black and I would rather have something black if possible or if not black then something in a dull color.

Originally Posted by John Brian

Thanks Dave
The "Billet wire pass through" is sort of what I am looking for. However I need something less brilliant than the shinny aluminum. My firewall is black and I would rather have something black if possible or if not black then something in a dull color.

glass bead it and paint it flat black

....scuff it with Scotch-Brite then rattle can it. It really would look nice shiny on the firewall though.

A hint or two - if you buy either one, there is a drilling template printed on the instructions - it's a bit off. Make up your own. I made mine out of a piece of scrap 18 - 22 ga steel. Another little trick - use the supplied #6 mounting screws, cut the heads off making them studs, then Lock-Tite them in the pass throughs, and assemble with nuts and lock washers. It's a heluva lot easier.