Thread: Wiring question
Results 1 to 6 of 6
LinkBack URL
About LinkBacksThreaded View
-
10-28-2008 11:47 AM #6
CHR Member
- Join Date
- Sep 2007
- Location
- UPSTATE New York
- Posts
- 4,336
....scuff it with Scotch-Brite then rattle can it. It really would look nice shiny on the firewall though.
A hint or two - if you buy either one, there is a drilling template printed on the instructions - it's a bit off. Make up your own. I made mine out of a piece of scrap 18 - 22 ga steel. Another little trick - use the supplied #6 mounting screws, cut the heads off making them studs, then Lock-Tite them in the pass throughs, and assemble with nuts and lock washers. It's a heluva lot easier.Dave W
I am now gone from this forum for now - finally have pulled the plug
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
this is all to common now days. i've lost a lot of people this year. we're all getting long in the tooth so it is a given. RIP people in N Texas lost a great trans man. Mike Mcgee of Trick Shift...
We Lost a Good One